94 runner brake lines

[skinny]

ok So as I'm working on my runner I have the tank out and the lines look nasty.

I would like to replace them frt to rear what size is the line just to make sure I get the right stuff.

also any pointers would be great . I have done lines in the past on other cars so this shouldn't be to bad (I think)

 

[Clone of the Mean]

What tank? The brake fluid reservoir? I would think you can go to any auto parts store and tell them what you have and get what you need. Probably even pre bent for the hard lines.....

 

[skinny]

the fuel tank is out

and yes the fuel lines

 

[Clone of the Mean]

Your title says 94 runner brake lines. I was confused. Look for a carb/injector specialist...

 

[OTTERYOTA]

here

OES Genuine W0133-1741729 Fuel Line | Auto Parts Warehouse

hope this helps. Ive ordered tons of stuff from them they rock the house!!!!

 

[skinny]

\oh man not sure how this got messed up it is break lines i'm doing

 

[SwiftRunner]

Take out a portion of the brake line and bring it with you to the auto part store. That way you can make sure you have the right size.

 

[OTTERYOTA]

LOL!!! then my link wont help :thumb3:

 

[Bad_Vision]

they sell a brake tube bender its totally worth it then all you need is a flaring tool and a 25ft roll of the right size brake line.

 

[SwiftRunner]

You also have to have some skill at the flaring tool. Practice on old line.

 

[The Shepherd]

When I did my brake overhaul on my 1987 4 runner the tools I used are, metric flare kit, mini pipe cutter, three different pipe benders, flare wrench, drill w/ bits, vise, black magic marker, vac caps, turkey baster, and a mighty vac pump. Parts two coils of brake line , zip ties, one can of. Brake clean, and one quart of brake fluid and over forty years as a automotive technician helps.