98 3rd gen T Case Torque Specs

[gnarlynick2072]

Hey Guys,

I was reading this thread about changing out my front flange seal on my t case.

http://www.toyota-4runner.org/3rd-g...r-case-output-shaft-oil-seals-how-diyers.html

Terrific write-up, however I was trying to find out if the 96-98 t cases attached to the 5 speeds were different.

To sum it up, need the torque spec for the flange crush nut on the front flange on the t case for a 98 5 speed 3rd gen.

If anyone has the FSM for a 98, that would be awesome too.

 

[TheDurk]

Hey Guys,

I was reading this thread about changing out my front flange seal on my t case.

http://www.toyota-4runner.org/3rd-g...r-case-output-shaft-oil-seals-how-diyers.html

Terrific write-up, however I was trying to find out if the 96-98 t cases attached to the 5 speeds were different.

To sum it up, need the torque spec for the flange crush nut on the front flange on the t case for a 98 5 speed 3rd gen.

If anyone has the FSM for a 98, that would be awesome too.

I have a paper '99 FSM. Torque on the companion flanges, front and rear, for both T-cases available, is 87 ft-lbs.

 

[gnarlynick2072]

Perfect-O thanks a million! Going to tackle this tonight.

 

[c0mmon]

Perfect-O thanks a million! Going to tackle this tonight.

I thought it was 35 ft lbs, 87 seems a little crazy

 

[TheDurk]

I thought it was 35 ft lbs, 87 seems a little crazy

Well, here is 2002--different case than the '99 J-shift, but still same 87 ft-lbs.--so not that crazy. I got it from the similar pages in my '99 paper FSM.

http://tacoma.site40.net/4Runner_96-02_Repair&Wiring/techinfo.toyota.com/ileaf/02toyrm/02toypdf/02rmsour/2002/024runne/ss/trvf3am/torspe.pdf