A Quick Before and After....

This should have been my build thread... :D Well...After replacing my other lights on my brush guard with Hellas....I decided I'd attempt to mount them on my rack. They were just sitting around in the garage so I gave it a shot. Turned out pretty good IMO. Thanks to JSMarine for his hose clamp idea. Worked like a charm! The lights mounted right up with no issues and I was able to run the wires based on another thread. I can't remember who posted it but I'll find it and definitely give you the credit. I believe it was on Yotatech, but the member may also post on here. I didn't want to drill anything so this route (down the door pillar)was by far the best one for me. I also ordered another toyota fog switch so everything looks factory inside. Now I have two switches. 1 for the Hella Fogs and 1 for the roof rack fogs. I took the Runner down a dark stretch on a back road and hit the lights. I was very pleased with the amount of light generated by them. Could see everything and I didn't have the glare off the hood that some have experienced. I definitely won't be using these lights for the most part unless we are camping and need some extra lighting. Plus, I'd want to get another battery and rewire the lights if I was running these for a long period of time. So in the end...this was a pretty good mod to tackle. I love the look of the lights on the rack and I also wanted them to work if needed as well. You never know when you will need additional light on a dark road in the middle of no where. Here are some pics.
 

Attachments

  • lights runner.JPG
    lights runner.JPG
    47.8 KB · Views: 610
  • lights runner5.JPG
    lights runner5.JPG
    26 KB · Views: 574
  • lights runner3.JPG
    lights runner3.JPG
    36.7 KB · Views: 578
  • lights runner4.JPG
    lights runner4.JPG
    21.8 KB · Views: 593
Can you post some pics of the wires job and how you connected them to the rack? Looks good as usual on your 4Runner.
 
That is one sweet rig!

I'm a new T4R owner. The coolaid is taking effect!

Thanks man! Doesn't take long for the mod bug to bite!

Can you post some pics of the wires job and how you connected them to the rack? Looks good as usual on your 4Runner.

Appreciate the compliment RonMAIDEN! I'll take more pics this weekend. My TG sliders are coming in today so I'll be trying to get those installed and painted. Plus, someone else wanted to see the stance of the truck with the Tundra wheels w/Spidertrax. In the meantime....here is the link I followed for installing my lights to the rack.

http://www.yotatech.com/f2/installed-new-rack-tjm-lift-kit-multiple-lights-pictures-included-111728/
 
How are you liking that brush guard? I found one on Craigslist and I'm pretty sure I'll pick it up. Also, if i may ask, how much did you pay so I can get an idea of how much to ask him down to. Thanks!
 
I like the Hunter brush guard for now until I decide on another bumper. I got mine off of eBay new for $150 shipped I believe.
 
Hey Stone, what hardware is used to attach the guard on? The guy I'm getting it from doesn't have the hardware. What could I use?
 
Wow....sorry man. Didn't realize you left me a question on here. Let me know if you still need info on the brushguard.
 
Been a while since I updated this. Really should've made a build thread. Anyway, added two more lights to the front of my rola rack. Looks a lot better now without the spoiler in my opinion. Also, made hi-lift and shovel mounts for the rack as well and built a storage box for the cargo area. It came out a little bigger than I wanted though. May have to put this one in the wife's van and make another. Here are a couple pics but I have to get the others off of my camera after I charge the battery....
 

Attachments

  • 4 lights lit2.jpg
    4 lights lit2.jpg
    9 KB · Views: 436
  • 4 lights.JPG
    4 lights.JPG
    44.3 KB · Views: 461
  • shovel pic.JPG
    shovel pic.JPG
    78.9 KB · Views: 470
  • hi-lift side pic.JPG
    hi-lift side pic.JPG
    73.6 KB · Views: 473
  • full side with hi-lift jack mounted.JPG
    full side with hi-lift jack mounted.JPG
    17.6 KB · Views: 467
  • storage box2.JPG
    storage box2.JPG
    55.2 KB · Views: 447
Last edited:
Stone - Your Runner is looking super clean! The BFG's/Tundra wheels really give it a great stance! Those wheels work so well on these 3rd gens. Your Runner is an inspiration to my "new" 98! :cool:
 
By accident, squeeze the E39 into a picture, please. I am a sucker for an E39. I played that game before I got into the Toyota's.
 
Thanks for the compliments guys!


looks good man. can u take some pics of how u mounted the hi lift?

I didn't take pics as I was fabbing my mounts together because my camera wasn't charged, but here are the instructions I used. I just couldn't see spending more for the mounts than the Jack so I decided to make my own. The parts I used came to about $12 or so.... Below is the link. Don't kill me....it's from a jeep forum. I did a search on DIY hi-lift mount and it took me to the site. All the credit goes to the guy who did this write up. Saved me from a lot of trial and error.

Homemade Hi-Lift Jack Mount for Yakima roof rack - JeepForum.com

By accident, squeeze the E39 into a picture, please. I am a sucker for an E39. I played that game before I got into the Toyota's.

Oops! ;):
 

Attachments

  • rrr3.jpg
    rrr3.jpg
    9.7 KB · Views: 440
  • rrr7.jpg
    rrr7.jpg
    12.5 KB · Views: 458
Last edited:
Had a little time last Saturday to quickly install a CB and antenna. I'll post again showing where i ran the antenna wire. It's a magnetic mounted one. I was going to go with the fire stick and buy the antenna mount from Drifter33 but I would've needed to remove my rear tail guards or needed to have the mount customized to fit. These are quick pics of where I temporarily installed my CB and where I placed the antenna. The CB mic is clipped into my Mag-Lite holder right now so I'll be moving that as well. I plan on moving the CB to the slot under my Radio so it looks cleaner and factory when i have more time. The CB works great and already came in handy this past weekend while trying it out. Truckers were warning folks of state boys all over I395. Ha! I don't plan on using it that much really. Just in case I need it in an emergency.
Has anyone come up with a place to hold a handheld scanner? I could put it in the glovebox or my storage box when not in use, but i was wondering if anyone came up with a perfect place to attach it to while driving.
 

Attachments

  • CB.jpg
    CB.jpg
    23.9 KB · Views: 394
  • DSC_0015.jpg
    DSC_0015.jpg
    106.6 KB · Views: 427
  • DSC_0017.jpg
    DSC_0017.jpg
    97.4 KB · Views: 405
  • DSC_0018.jpg
    DSC_0018.jpg
    124.3 KB · Views: 404
Truck looks great! I think I may need to pull my running boards off...what to do for front mudflaps though?
 
Great Combination!

Hey, just reading through your thread, as I just purchased a 2002 4Runner, and noticed the picture of your E39 M5. I also have a 2001 E39 M5, in Alpine White.

Are you on the m5board? If so, what's your signon? I'm richbob on there, too.

Here's my new, un-modded as yet, runner.
 

Attachments

  • 4Runner.jpg
    4Runner.jpg
    45.7 KB · Views: 366
fender flares

Hey, just reading through your thread, as I just purchased a 2002 4Runner, and noticed the picture of your E39 M5. I also have a 2001 E39 M5, in Alpine White.

Are you on the m5board? If so, what's your signon? I'm richbob on there, too.

Here's my new, un-modded as yet, runner.

where did you get your fender flares
 
MY Fender Flares?

If you're asking me, that's the Sports Edition SR5, which comes with color-matching flares and bumpers - it's what convinced me to buy this particular model.
 

Members online

Forum statistics

Threads
278,307
Messages
3,554,056
Members
248,016
Latest member
Advally Service

Trending content

Back
Top