A.Wilson013
New member
Early on in my "wtf, why won't this thing run correctly" stage (prior to the 7th injector install, which is golden) I consulted Split Second about their FTC1, which is incredibly similar to the URD Performance Calibration Unit.
Their FTC1 came with an option to add 4 aux inputs for like $75. Essentially just added 4 wires to the harness of the FTC1, so that you could data log instead of just psi/rpm, things like egt, A/F, etc.
I think that the ability to add an input for A/F would be VERY helpful for us home tuners. To be able to log boost/engine speed/AF all in one using just the Split Second R4 software.
My question... Have any of you wiring/electrical experts looked into this at all? Thoughts on if it's possible or no?
Their FTC1 came with an option to add 4 aux inputs for like $75. Essentially just added 4 wires to the harness of the FTC1, so that you could data log instead of just psi/rpm, things like egt, A/F, etc.
I think that the ability to add an input for A/F would be VERY helpful for us home tuners. To be able to log boost/engine speed/AF all in one using just the Split Second R4 software.
My question... Have any of you wiring/electrical experts looked into this at all? Thoughts on if it's possible or no?
