Another Lift question (go ahead groan)

[GHARP57]

I didnt see info on that sticky that steeze posted about the shocks them selves.

Could I run the 2000-2006 tundra trd oem bilstein shocks front and rear?

IM looking at getting the highlander springs for a small lift and with my employee discount at toyota i figure why not get new oem stuff.

 

[blairracd]

UUUGGGHHH!!

Just kidding. Yes you can, second perch on the billy's will get you that.
Read/skim through this thread, this is basically what it looks like you want.

http://www.toyota-4runner.org/3rd-gen-t4rs/154200-speedys-lift-install-how-video.html

 

[Charlene]

UUUGGGHHH!!

Just kidding. Yes you can, second perch on the billy's will get you that.
Read/skim through this thread, this is basically what it looks like you want.

http://www.toyota-4runner.org/3rd-gen-t4rs/154200-speedys-lift-install-how-video.html

Those aren't the shocks he's talking about. He talking about stock bilstein shocks that come on those years of Tundras

 

[1985taylor1925]

I didnt see info on that sticky that steeze posted about the shocks them selves.

Could I run the 2000-2006 tundra trd oem bilstein shocks front and rear?

IM looking at getting the highlander springs for a small lift and with my employee discount at toyota i figure why not get new oem stuff.

Yes you can. I ran a front strut assembly from a a 2006 tundra 4x4 double cab for a few years. I got around 2" lift. I will add that they were too stiff for my liking. I now run taco 5100s with stock 99 coils and like it much better. But, if you found a set for cheap, give it a shot.

 

[blairracd]

Those aren't the shocks he's talking about. He talking about stock bilstein shocks that come on those years of Tundras

My mistake, same principle will apply though.
Speedy even mentions using the stock billys.

 

[BrandonF]

I also ran the stock tundra strut/coil. They were not TRD. I put a 3/4" top plate spacer on top of them and got about 2.5" of lift if I remember correctly. Im now running tundra bilstein 5100's with those same Non-trd tundra coils. Im on the 3rd perch with a bumper, winch, and full skids and getting 2.5" of lift. The ride and flex are good (no sway bar)

 

[rkntoy]

I didnt see info on that sticky that steeze posted about the shocks them selves.

Could I run the 2000-2006 tundra trd oem bilstein shocks front and rear?

IM looking at getting the highlander springs for a small lift and with my employee discount at toyota i figure why not get new oem stuff.

You guys are missing it - he is asking about running OEM Bilsteins and TRD springs on the Front and the Rear.

Are you talking about running the same Tundra TRD front setup on the front and rear? The Tundra Rear oem setup is leaf springs.

 

[JayRolla]

You guys are missing it - he is asking about running OEM Bilsteins and TRD springs on the Front and the Rear.

Are you talking about running the same Tundra TRD front setup on the front and rear? The Tundra Rear oem setup is leaf springs.

He asked about shocks, not the coils.