Anyone from GTA

1-1. AlexJet - 4th Gen. - Lift+Tires, Expedition style (North of Toronto)
1-2. AlexJet - 3rd Gen. - Lift+Tires, Expedition style (North of Toronto)
1-3. AlexJet - Land Cruiser - Lift+Tires (North of Toronto)
2. Schwalmy - 4th Gen. - Stock (Toronto)
3. Mossy - 1st Gen. - ... (Goderich)
4. Team haymaker - ... (Hamilton)
5. Duzuck - 3rd Gen. - Stock (Paris)
6. 4X4V8 - 4th gen - OME in Sig (Toronto)
6A. 4X4V8 - 5th gen - Stock (Toronto)
7. jimnto - 1st gen - just drove it up from Texas! lifted a wee bit and otherwise stock
8. One_96TR4 - OME/Tundra (Brampton)
9. RedDemon- 1st gen- Stock Red (Mississauga)
10. Steelcity4R-4th Gen/SR5/V6/Stock/Blue (Hamilton)
11. Blanco - 3rd Gen/SR5/Toyo A/Ts/Roof Basket/Hella 500s (Toronto)
12. 5Gen2011 - 5th Gen/Limited (Toronto)
13. dgmorr - 4th Gen - Stock (Mississauga)
14. scanny - 5th Gen - Stock except tires (Mississauga)
15. Digital Bath - 3rd Gen - Stock except 32" tires/clear corners
16. diverdriver - 5th Gen now - Lifted, wheels and BFG's (North York)
17. offroadingatc - 5th gen, lifted, duratracs etc (Milton)
18. 963rdgen - 3rd gen, Stella bumpers winch green 32's (East Toronto )
 
Mike at Mechanics Zone in Scarborough. He personally owns 2 4runners and is a great mechanic and guy. If you join sontt his username is Bigrunner.
 
I have two new 338mm front rotors that were supposed to be for my '03. I ordered the 319mm but I was sent the wrong part. It will cost me more to ship these back than they are worth. Anyone want both for $50? I'm in Mississauga.
 
dgmorr said:
I have two new 338mm front rotors that were supposed to be for my '03. I ordered the 319mm but I was sent the wrong part. It will cost me more to ship these back than they are worth. Anyone want both for $50? I'm in Mississauga.
Click to expand...

What rotors are those?
Are they for Limited with 17" rims?
 
AlexJet said:
What rotors are those?
Are they for Limited with 17" rims?
Click to expand...

They were supposed to be. I have a Limited with 17" rims, but my rotors are 319mm. My caliper casting is 13WG. I believe these are for 13WH calipers, but best to measure your current rotors.

They are branded "Pronto"
 
Last edited:
Do you guys know 4Runners well at Rockstar Motorsports? I'm going to be off the factory warranty by the August and I might need a good shop just in case something's broken. Or I decide finally for a lift or other mods.
 
Last edited:
Alarm install shop recommendations

Recommendations for a shop for after market alarm installation?

Just to be clear, I am not planning on installing an after market alarm. I want to get a Keyless GO push button start system installed on my truck and from what I've read so far, anyone proficient at installing alarms can install this unit.

This is the unit I want to get installed Keyless Ignition RFID Push Button Start systems
 
scanny said:
Do you guys know 4Runners well at Rockstar Motorsports? I'm going to be off the factory warranty by the August and I might need a good shop just in case something's broken. Or I decide finally for a lift or other mods.
Click to expand...

We don't specialize in ONLY 4Runners, if that was your question.

More of an all around custom car and truck shop. Servicing/modifying everything from Honda Civics to Bentleys to full-on mud boggers. Lifting, lowering, hydraulics, air ride, general mechanic work, audio, alarm systems, wheels, tires, bodywork and paint.

If you can dream it, Rockstar Motorsports can build it.
 
Last edited:
Bastone said:
We don't specialize in ONLY 4Runners, if that was your question.

More of an all around custom car and truck shop. Servicing/modifying everything from Honda Civics to Bentleys to full-on mud boggers. Lifting, lowering, hydraulics, air ride, general mechanic work, audio, alarm systems, wheels, tires, bodywork and paint.

If you can dream it, Rockstar Motorsports can build it.
Click to expand...
Hi Bastone, what about the push button install I asked above? If you go to that site they have installation instructions shown there. Let me know if you would do that type of work. If it works out well I'd like to get it done on my truck as well as my GS400.
 
Bastone said:
We don't specialize in ONLY 4Runners, if that was your question.

More of an all around custom car and truck shop. Servicing/modifying everything from Honda Civics to Bentleys to full-on mud boggers. Lifting, lowering, hydraulics, air ride, general mechanic work, audio, alarm systems, wheels, tires, bodywork and paint.

If you can dream it, Rockstar Motorsports can build it.
Click to expand...

Thanks, now I know where to go when I decide to lift my truck : )
 
SilverGs said:
Hi Bastone, what about the push button install I asked above? If you go to that site they have installation instructions shown there. Let me know if you would do that type of work. If it works out well I'd like to get it done on my truck as well as my GS400.
Click to expand...

We can most definitely install the Push Button Start into your vehicle. Your best bet would be to come by the shop so we can have a look at the work involved.

We're located at 1201 Speers Road in Oakville, or give us a call at (905) 842-7827 (if no one answers, just pop by).

scanny said:
Thanks, now I know where to go when I decide to lift my truck : )
Click to expand...

Absolutely, Toytec Authorized Dealer! :becky:
 
963rdgen said:
1-1. AlexJet - 4th Gen. - Lift+Tires, Expedition style (North of Toronto)
1-2. AlexJet - 3rd Gen. - Lift+Tires, Expedition style (North of Toronto)
1-3. AlexJet - Land Cruiser - Lift+Tires (North of Toronto)
2. Schwalmy - 4th Gen. - Stock (Toronto)
3. Mossy - 1st Gen. - ... (Goderich)
4. Team haymaker - ... (Hamilton)
5. Duzuck - 3rd Gen. - Stock (Paris)
6. 4X4V8 - 4th gen - OME in Sig (Toronto)
6A. 4X4V8 - 5th gen - Stock (Toronto)
7. jimnto - 1st gen - just drove it up from Texas! lifted a wee bit and otherwise stock
8. One_96TR4 - OME/Tundra (Brampton)
9. RedDemon- 1st gen- Stock Red (Mississauga)
10. Steelcity4R-4th Gen/SR5/V6/Stock/Blue (Hamilton)
11. Blanco - 3rd Gen/SR5/Toyo A/Ts/Roof Basket/Hella 500s (Toronto)
12. 5Gen2011 - 5th Gen/Limited (Toronto)
13. dgmorr - 4th Gen - Stock (Mississauga)
14. scanny - 5th Gen - Stock except tires (Mississauga)
15. Digital Bath - 3rd Gen - Stock except 32" tires/clear corners
16. diverdriver - 5th Gen now - Lifted, wheels and BFG's (North York)
17. offroadingatc - 5th gen, lifted, duratracs etc (Milton)
18. 963rdgen - 3rd gen, Stella bumpers winch green 32's (East Toronto )
19. Beau04 - 4th gen, lift/wheels/tires (Cambridge/Kitchener)
Click to expand...

New Member here from Cambridge... have had my 4runner a year now.. I've taken it off roading a few times and its amazing in the mud :thumb:

 
Update on me

I sold my first gen and now have a 2000 limited. It is in great shape but needs the suspension attended to. I was thinking of getting landcruiser springs and Tundra springs from the wrecker - anyone have any advice?

I must admit I am not the ost fond of Mud and invisible hazards underwater - but I am interested in rough terrain with spotters and stuff.

Anyone planning a trip soon?

Welcome to the list.

Jim in Toronto
 
You must log in or register to reply here.

Similar threads

N
FS: 5th Gen retractible cargo cover - Dallas area $20
Replies
0
Views
1K
Naylor99
N
mznobull
Looking for a Mechanic - IL
Replies
6
Views
1K
phattyduck
P
R
Anyone have to tear the rear hatch latch assembly out from the inside??
Replies
12
Views
36K
MrTom
MrTom
C
Has anyone figured out a solution to the excessive downshifting in cruise control
Replies
13
Views
4K
Trumpet
T
N
NEED 01 SR5 Mechanic - DANA POINT / LAGUNA area SoCal area
Replies
1
Views
4K
nov74fj40
N

Members online

Total: 362 (members: 1, guests: 361)

Forum statistics

Threads
278,310
Messages
3,554,080
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top