Anyone run these lights?

Register to hide this ad
I saw this today as well. The price is sole thing that put me off. If Rigid, Vision X, Baja Designs are all so expensive for their quality, then what is the trade off for the price being so cheap with these? Quality? The light output pics on the site weren't much, and there isn't much out there about them except their site. Of course they're going to be biased about them. I'd like to see more on them before I spent the money on em.
 
My thoughts exactly!! I mean $300 bucks for a 30" compaired to rigid 30" at $799 for SR series and $999 for E series. I definitely like some more info.
 
Last edited:
Good find man. That some interesting conversation. I agree these might be worth a shot. My only question (one probably suited for the vendor) is durability. Here on the east we get heat, rain, snow, salty winter roads, mud, etc. If they hold up and are legit seems worth it. And for $300 bucks that not bad at all.
 
These are the same Chinese bars that a bunch of different companies are selling. I know some of the earlier Chinese bars that showed up last year had water intrusion problems.
 
Yeah I know what your saying man. I know the guy claims they are made in Texas, they just seem very similar to the Hanma? led bars. Not saying this guy isn't legit, but just would like to see a little more on them.

I'd like to see a side by side comparison between the two. Component for component.
 
4RunnerSeth said:
These are the same Chinese bars that a bunch of different companies are selling. I know some of the earlier Chinese bars that showed up last year had water intrusion problems.
Click to expand...

I appreciate your assumption, but my bars are not made in China. I get all of my bars from my own manufacture that is in fact located here in the United States.

To everyone else, I encourage you to try out one of my products. Yes the cost seems low compared to Rigid and such, but it's defenitely worth a try to see how you like it. I have one on my personal off-road vehicle and haven't had any issues with it at all, even after abusing it. I know my statements may be questioned since i'm obviously the one selling these, and everyone may assume i'm just being biased about them, so all i'm asking is that you try out the product if you're interested and see for yourself.

:)

-Ledbarsusa
 
Yeah i mean as with anything that I / we invest money and time into I personally would like some more assurance of the product. For the amount of use I will get out these I don’t "need" the thousand dollar set but don’t want to fall into category of buy cheap get cheap...
 
LEDbarsUSA said:
I appreciate your assumption, but my bars are not made in China. I get all of my bars from my own manufacture that is in fact located here in the United States.

To everyone else, I encourage you to try out one of my products. Yes the cost seems low compared to Rigid and such, but it's defenitely worth a try to see how you like it. I have one on my personal off-road vehicle and haven't had any issues with it at all, even after abusing it. I know my statements may be questioned since i'm obviously the one selling these, and everyone may assume i'm just being biased about them, so all i'm asking is that you try out the product if you're interested and see for yourself.

:)

-Ledbarsusa
Click to expand...

If we did decide we'd like to give your product a try, and for some reason we were displeased with it. Do you have any sort of return policy. I'm always up to helping out newish companies and in country products, but not at the expense of quality.

Thank you though for taking the time to become a vendor for the site! I hope you do well from being here.
 
FactoryRide said:
If we did decide we'd like to give your product a try, and for some reason we were displeased with it. Do you have any sort of return policy. I'm always up to helping out newish companies and in country products, but not at the expense of quality.

Thank you though for taking the time to become a vendor for the site! I hope you do well from being here.
Click to expand...

+1 good luck and please any additional info as far as durability goes would be appreciated.
 
I normally wouldn't take returns unless it was defective, but since there seems to be so much negativity going on about them i'll offer you guys a 10 day money back guarentee if you purchase one in my group buy. This is for the people here that are skeptical but would like to try one out. If I did that for you guys and you decided to send it back, you would have to do so at your own cost, and you would not get the $15 back that I had to use to ship it.

So worse case, if you buy one and don't like it, you can just send it back and you will only be out $15 plus the cost of you shipping it back to me. I think that seems fair since I normally wouldn't offer this.

Cheers!

-Ledbarsusa
 
LEDbarsUSA said:
I normally wouldn't take returns unless it was defective, but since there seems to be so much negativity going on about them i'll offer you guys a 10 day money back guarentee if you purchase one in my group buy. This is for the people here that are skeptical but would like to try one out. If I did that for you guys and you decided to send it back, you would have to do so at your own cost, and you would not get the $15 back that I had to use to ship it.

So worse case, if you buy one and don't like it, you can just send it back and you will only be out $15 plus the cost of you shipping it back to me. I think that seems fair since I normally wouldn't offer this.

Cheers!

-Ledbarsusa
Click to expand...

t4r4life said:
i would love to see a torture test
Click to expand...

I think the best thing they could do is a well explained comparison against the competition . Take a Rigid 30" and your 30" and make a simple video showing the products side by side with some technical info about each. See how they stack up. If indeed these are true to the test / info that in my option will help kick start sales. Especially as a T4R vendor :cowboy:
 
personally for me i rather save the money and support a new vendor compare to all the big companies, and these lights look awesome. as long as they are durable i think people will buy them like hot cakes, esp with a t4r.org discount or something similar.
 
I'd love to get a Rigid bar to do a comparison with my own and hopefully sometime in the near future i'll be able to do so, but I most likely won't be able to get one for a while. I'm just a normal person that has bills to pay too, and that's the whole point I started LEDbarsUSA is so people could get nice lights without paying a crazy amount for them.


Thanks for the comment t4r4life. I started out here with a group buy in hopes of getting some new customers, and having more people to say they have experience with my LED bars. If my group buy does well then i'm defenitely willing to work with you guys to try and get more discounts. If it does poorly then I won't be re-newing my sponsorship next month unfortunately. It's really expensive just to be able to do this, and i've had to put a lot of my own hard earned money and time to get this going. So i'm hoping all goes well from now on.


Cheers,

-Ledbarsusa
 
9e8abeju.jpg

etyzy8yp.jpg


I spent 350 on this one and the quality seems fine. I actually started a thread about it. For the money I spent on this I could buy it 2.5 times before I'm out the cost of a Rigid. I couldn't be happier with it. It's a 30" dual row led light.

tumu7egy.jpg
 
That looks great, good output too.

Sadly my manufacture is having some issues so I am no longer going to be selling any LED bars until I find a new manufacture, and test a few of them out myself. Maybe then i'll try to get back on my feet and get something going again.

I appreciate those of you that treated me with respect, and those of you that chatted with me online. Hopefully i'll be back soon with even better products.


Regards,

-Max@LEDbarsUSA
 
LEDbarsUSA said:
That looks great, good output too.

Sadly my manufacture is having some issues so I am no longer going to be selling any LED bars until I find a new manufacture, and test a few of them out myself. Maybe then i'll try to get back on my feet and get something going again.

I appreciate those of you that treated me with respect, and those of you that chatted with me online. Hopefully i'll be back soon with even better products.


Regards,

-Max@LEDbarsUSA
Click to expand...

Best of luck Max, I hope you get it resolved.


Zach
 
You must log in or register to reply here.

Similar threads

UroRunner
Diecast Model 1:18
Replies
2
Views
5K
fourwd1
fourwd1
J
Weird Electrical Issue
Replies
3
Views
685
phattyduck
P
S
Able to buy less than stick on 2026?
Replies
12
Views
8K
Lemming
L
P
Gauges, needle position etc. Much more, but a starter
Replies
2
Views
1K
Parks Junkie
P
4
Ktjo driver side grab handle
Replies
4
Views
6K
LiL13izzy7
LiL13izzy7

Members online

Total: 6,650 (members: 4, guests: 6,646)

Forum statistics

Threads
278,450
Messages
3,551,319
Members
248,163
Latest member
REE

Share this page

Trending content

Back
Top