Anyone running a 3" front and 1.5" rear lift

[soundstudio315]

I'm currently running 2.5" daystar in the front and nothing in the rear (RAS, PIA setup).

It's really completely level, no rake. My Xreas needs replacing so I'm thinking about doing a lift 3" up front and ditching the RAS in the rear, but seems the 2" or 2.5" rear spacer will give the factory rake look again?

 

[JD914]

I have the Bilstein 5100's on the highest setting, a 1.5" rear spacer and FJ springs. While I haven't actually measured, that should have given me 3" in front and 2" in back, and there's definitely a bit of rake. I'd bet you'd still have it with 3" and 1.5" of lift.

 

[ARK_SWAMP_RIDER]

When I did my first lift, I lifted the front 1.5". I'm currently at 3.5" front, 2" rear. There are pics of both in my build thread (link in sig).