Anyone using Rokmen trail series rear arms?

[85GT-79FJ40]

Curious if I would like these. I've got eibachs/5100's and JBA arms up front. I just changed out the stock LCA bushings in the front for Whiteline urethane bushings and the front is SO much better now. More road feel in the steering and way better overall. No more jiggle up front over rough pavement. Haven't had it in the dirt yet.

So now I'm thinking of the rear. This is my DD and I drive a fair amount on secondary roads so I don't want to hear or feel any harshness. So anything with heims or johnny joints is out. I'm not a rock crawler. Just want to tighten it up a little. I'm thinking maybe these arms and urethane in the track bar might get me there. I already have urethane sway bar bushings on both ends. The Rokmen arms seem like a good deal but I don't want to waste money I could be putting into my Fox project either.

 

[honda250xtitan]

if i were to get lowers it'd be those. sonoran steel sells bushings for the uppers as well. according to them new uppers are a waste, just replace the bushings.

seems like an affordable way to tighten up the back end and allow bind free travel.

 

[85GT-79FJ40]

I bought a set on black Friday from Wheelers and they were out of stock. They arrived last week and I put them in today. Did just what I had hoped. Tightened up the rear of the truck without being harsh at all. I ordered urethane bushings for the stock panhard bar too but they are on back order with Whiteline. After that I need to consider the suspension done. I need way too many parts for my fox project still. And LOTS of time.