Baja Designs Ditch Lights w/Switch Pro

[412Runner]

Been looking for a walkthrough everywhere and couldn’t find one

I have a switch pro 9100 in my truck and want to install the ditch lights. I can’t find any sort of wiring instructions to do this with a switch pro. Has anyone done this and could lend some advice?

 

[sn_85]

They don't come with a wiring tutorial? Anyways here's a good write up. Should be pretty easy to wire it up for future expansion.

Switch Pro 9100 / Power Tray Install on 5th Gen 4Runner - Full How To

 

[COGoalie]

Did you get these wired?

I was curious if the Baja lights were able to be dimmed to 50% with the SP-9100.

Thanks.

 

[mtray]

Did you get these wired?

I was curious if the Baja lights were able to be dimmed to 50% with the SP-9100.

Thanks.

I can dim my S8 light bar with the SP-9100, I would assume you can do the same with the ditch lights.

 

[umidkusername]

There are so many how-tos on YouTube.

But there was a video about the switch pro catching on fire and the guy going to a competitor. I can’t remember if it was the 9100 or an earlier model.

 

[COGoalie]

I can dim my S8 light bar with the SP-9100, I would assume you can do the same with the ditch lights.

Thanks. That's what I needed to know.