BAMF Thanksgiving sale!!!

[Nyc-Runner]

Figured i would post this up, i wasn't sure if anybody else knew about it? I spoke to them earlier in the week and they said they were going to post something up on here, but they also said it was going to start on the 25th and i just checked the their website and it starts tomorrow the 18th!.I think i'm going to be getting a pair of sliders and Lca skids, 30% off is a pretty hard deal to pass up!!!


Welcome to BAMF -

 

[jimmied]

any pics of the 4runner sliders with kick out?

 

[Nyc-Runner]

any pics of the 4runner sliders with kick out?

There's a couple guys on here that have them on a 4th gen, or just do a google search.

 

[NoWayOut]

Any code or will it just be applied at checkout? I need some LCA skids.

 

[Johnny4runner]

any pics of the 4runner sliders with kick out?

I have BAMF's sliders with kickout on my 4Runner (sorry can't find any good pics right now). I love them and Jerry at BAMF is a great guy to work with. I'm Bay Area so I had him install the sliders and do my body mount chop.

I wanted the kickout because I wanted to make sure I had a good step for people to get in the back of the truck. But in hindsight I probably would have been fine with the regular sliders w/o the kickout. Because of the back door the sliders have to lay flatter on 4Runner than Tacomas, so the kickouts stick out pretty far. I definitely would not put on kickouts without a body lift which give you more room to angle the slider up.

It is nice having a big step to the back door, but the slider by the front door is plenty big for me.

 

[Nyc-Runner]

Any code or will it just be applied at checkout? I need some LCA skids.

Its just applied in the check out.

 

[NoWayOut]

Thanks. I ordered my LCA skids earlier today

 

[Nyc-Runner]

I have BAMF's sliders with kickout on my 4Runner (sorry can't find any good pics right now). I love them and Jerry at BAMF is a great guy to work with. I'm Bay Area so I had him install the sliders and do my body mount chop.

I wanted the kickout because I wanted to make sure I had a good step for people to get in the back of the truck. But in hindsight I probably would have been fine with the regular sliders w/o the kickout. Because of the back door the sliders have to lay flatter on 4Runner than Tacomas, so the kickouts stick out pretty far. I definitely would not put on kickouts without a body lift which give you more room to angle the slider up.

It is nice having a big step to the back door, but the slider by the front door is plenty big for me.

Yeah i actually spoke to somebody their the other day about the kick out on the 4th gen, they said they have since modified the sliders with the kickouts for the 4th gen so they fit flush now and can be angled up so you don't run into any issues with the rear door/fender as i think some where having or thats why they where recommending the BL

 

[Nyc-Runner]

Thanks. I ordered my LCA skids earlier today

Welcome. Nice I'm getting both sliders/kickout and LCA skids, hopefully we beat the rush i know they where saying last year it got pretty crazy with all the orders!

 

[ebg18t]

Welcome. Nice I'm getting both sliders/kickout and LCA skids, hopefully we beat the rush i know they where saying last year it got pretty crazy with all the orders!

I got my sliders in the May GB. They arrived at my house mid September. Jerry does great work but just be patient. He did all the small parts first, then did batches of sliders.

I have the version with kickout's and no body lift. The angle they are at makes it difficult to weld tight to the body. On mine you can see the spacer ~1.25" between the slider arms and the lower part of the body due to the Angie of the kickout's in relation to the rear door. I might have opted fir no kickout if I had known.

 

[Nyc-Runner]

I got my sliders in the May GB. They arrived at my house mid September. Jerry does great work but just be patient. He did all the small parts first, then did batches of sliders.

I have the version with kickout's and no body lift. The angle they are at makes it difficult to weld tight to the body. On mine you can see the spacer ~1.25" between the slider arms and the lower part of the body due to the Angie of the kickout's in relation to the rear door. I might have opted fir no kickout if I had known.

Thanks for letting us know,i was expecting there to be a decent wait time on these when i spoke to him he other day he said he already had a good batch of sliders made hoping to get a head of the rush a little bit.

Also i think that what he was talking about in regards to the kickout because i specifically asked him about sliders with kickout's for the 4gen. He said they have addressed the issue that people where having with the sliders with the kickouts on the 4th gens. So hopefully this won't be a issue any more.

 

[Chandlerdoom]

Anyone else having issues seeing the shipping amount? I tried the calculate in the cart, and tried in checkout. still says 0.00 :noidea:

 

[hrt4me]

thanks for the heads up

 

[ebg18t]

last time he just sent us paypal invoices once he closed the GB. Paid up front for the product, then paid shipping once they were ready to ship. Since there are a few shipping options i doubt his system is set to calculate on the site. Most of the companies that due metal fab quote shipping after.

 

[JustSomeName]

Got my sliders w/o kickout last thanksgiving from BAMF. Im from the bay as well and got them installed at his shop. He "test fit"t he kickout ones just to show me how weird of an angle they have to be, really glad i got the non kickout ones, they sit flush on the 4th gen and look real good!

 

[jimmied]

My concern is my little ones still need to hop in the back so kick out or no kick out?

 

[JustSomeName]

ive got size 11 shoes and I'm still comfortably able to use the sliders as a step without kickout or body mount

 

[8sm]

any pics of the 4runner sliders with kick out?

unless their $$$$$$$ powder coat application has improved I would pass. These sat on a Phoenix AZ garage shelve wrapped as delivered when we decided to install them, they were rusting.

 

[Nyc-Runner]

Anyone else having issues seeing the shipping amount? I tried the calculate in the cart, and tried in checkout. still says 0.00 :noidea:

Yeah i didn't get a shipping amount either, I think as ebg18t stated he will charge the shipping when their finished and ready to ship.

 

[Nyc-Runner]

Got my sliders w/o kickout last thanksgiving from BAMF. Im from the bay as well and got them installed at his shop. He "test fit"t he kickout ones just to show me how weird of an angle they have to be, really glad i got the non kickout ones, they sit flush on the 4th gen and look real good!

As i said earlier in the post i spoke to him last week and he said he has since addressed this issue with the kickouts on the 4th Gen, they are now modified properly so the sit flush on the frame and are angled up how sliders normally are but you don't run into any issues with the rear door/fender. I think a lot of people where having issues as you described so he changed them a little bit to fit properly. I just really love the the kickouts on these sliders definitely my favorite out of all the kickout sliders!