Bilstein 5100 Series - 5th Gen

We greatly appreciate all the support.

Bilstein 5100 Complete Sets are a great aftermarket option over stock shocks.

In-Stock and Shipping Daily - Click Here

Complete Sets are already discounted for forum members.

Price includes shipping to Continental US and No Sales Tax outside NV.
 
MiloC said:
KP Texan
Thanks! That makes sense. I’m going to order some and put them on. Great Forum.
Thanks Again!
Click to expand...

The rubber bushing and washer should have came with the struts in the hardware bag, along with a new top nut. You will not be able to install a new bushing, washer and nut without compressing the spring and strut.
 
ElJefe said:
Any black Friday sales?
I'm looking at getting these to help with the ride but I will also want to add some new coils to give me a bit more of a lift.

How hard are these to install on your own?

Thanks
Click to expand...

The install is certainly something you can do yourself, but it all depends on what your mechanical ability is and your access to tools/equipment. The springs/strut is under a great deal of compression, so caution must be used... You can find instructions on the forum. I installed both front and rear 5100s with Cornfed spacers in rear solo in my garage. Without a spring compressor.
 
The original P rated Dunlop 265/70/17 tires on my 2018 TRD ORP are done and I am considering replacing them with either:

1. Falken P rated 265/70/17's alone, or

2. Falken LT C rated 275/70/17's with Bilstein 5100's front and rear.

The local 4WP shop tech has been very helpful and is suggesting that for what I want (minimal lift, better ride on/off road) I should consider going the second route and using Bilstein coils for a 1" lift in the rear and adjusting the front 5100's to level out the ride (at about 2-2.5"?).

What do you think? I will try to attach 2 pages of the proposed invoice with details of the parts and the pricing. Do you think the labor is too high? I am in California! LOL

Thanks for your help with this decision!
 

Attachments

  • 4wp quote details 1 jpg.JPG
    4wp quote details 1 jpg.JPG
    123 KB · Views: 1,940
  • 4wp quote details 2 jpg.jpg
    4wp quote details 2 jpg.jpg
    125.9 KB · Views: 1,989
We greatly appreciate all the support.

Bilstein 5100 Complete Sets are a great aftermarket option over stock shocks.

In-Stock and Shipping Daily - Click Here

Complete Sets are already discounted for forum members.

Price includes shipping to Continental US and No Sales Tax outside NV.

_
 
Looking for Bilstein 5100's?

Bilstein 5100 Complete Sets are a great aftermarket option over stock shocks.

In-Stock and Shipping Daily - Click Here

Complete Sets are already discounted for forum members.

Price includes shipping to Continental US and No Sales Tax outside NV.

_
 
We wanted to share a Quick Update on Bilstein 5100's.

The Rear 5100's, Part #33-187174, are currently on Manufacturer Backorder.

The production facility in Ohio was shut down for a few weeks, but opened
up last week and started resuming production.

We shipped out our last stock of 5100's over the weekend.

We hope to have these back In-Stock and Ready to Ship in the next couple of
weeks at the latest.

Bilstein has always been good at spreading out availability to Distributors and Authorized
Dealers, so we could see limited availability start arriving at anytime while they work on
getting stock levels back to normal.

We look forward to sharing details on availability and shipping as we hear from Bilstein.

Please feel free to contact us with any questions.

_
 
I installed Bilstein 5100's in my rig, along with Bilstein springs. every time I go over a bump, there is a clunk coming from them, both sides. I have them at 2", yes they are assembled correctly, and its a KDSS model 4runner. factory UCA's. any ideas?
 
Hi all! Going to go for a 1.75" front / 1" rear setup. Pretty much settled on the 5100's for the shocks and front lift, but I'm still debating on what to do for the rear.

Can anybody chime in on if going for new coils over spacers is worth the extra money for the rear? 1" spacers are $100 or so, and new coils would be about double that (looking at Dobsons C59-505, ~$190). I don't do super serious offroading, but do occasionally find myself down some rough trails.

Any other recommendations would be appreciated!
 
axel1 said:
Hi all! Going to go for a 1.75" front / 1" rear setup. Pretty much settled on the 5100's for the shocks and front lift, but I'm still debating on what to do for the rear.

Can anybody chime in on if going for new coils over spacers is worth the extra money for the rear? 1" spacers are $100 or so, and new coils would be about double that (looking at Dobsons C59-505, ~$190). I don't do super serious offroading, but do occasionally find myself down some rough trails.

Any other recommendations would be appreciated!
Click to expand...

So I debated putting a spacer in the rear but in the end decided to pay $190 and purchased a Dobinson 1” spring. I wanted to completely change out the stock suspension and the wife really liked the teal springs. Will install them today. I also decided to purchase the front Dobinson 1.75” spring as well. The 4Runner doesn’t see much off roading so can’t help you there. But as a Jeep owner, we always say, don’t fear the spacer
 
Shout out to total automotive performance. They were super helpful and quick to reply with any questions or changes I had when ordering my 5100’s and Dobinson springs. Thanks again!
 
We wanted to share a Quick Update on Bilstein 5100's.

The Rear 5100's, Part #33-187174 are being received in limited quantities.

Our Fulfillment Team has been working hard to get all pending orders processed and shipped today!

We greatly appreciate everyone's patience that had orders pending - Everyone has been taken care of!!

Bilstein is doing a great job spreading out availability to Dealers.

Please feel free to contact us with any questions.

_
 
All of the Rear Bilstein 5100's received have been shipped.

The Rear Bilstein 5100's, Part #33-187174, continue to experience manufacturer stock delay.

Bilstein is working to hard address inventory levels on popular 5100's.

We have received limited quantities the last 2 weeks (50 and 40 respectfully) and
hope to see more this coming week.

We are still seeing orders come in for the Complete Sets and will continue to do our
best to get these processed and shipped as soon as possible.

Your continued support is much appreciated - Thank you so much!!

Please let us know if you have any questions or want to explore other suspension options.


Thank you,

Customer Support
702-979-1577

_
 
Shop in Vegas

Any shop recomendation in Vegas?
I would like to pickup the shocks at Total Automotive and install somewhere?
Thank you.
 
Our Fulfillment Team has been busy today processing orders for shipping.

Almost 40 pending orders will be shipped today!

Thank you so much for your patience and support.

Rear 5100's, Part #33-187174, that have been holding up orders are currently In-Stock.

Bilstein continues to do an amazing job on the availability of popular items to Dealers.

Please feel free to contact us with any questions.

b29aca7a-c9a6-4109-ac6e-233a5993a223-800.jpg

_
 
You must log in or register to reply here.

Similar threads

S
FS- 5th Gen Bilstein 5100 front shocks + rear coils Bundle $299
Replies
1
Views
8K
Denver4rguy
D
W
Last Days of Black Friday: DISCOUNT + FREE Shipping. Hurry!
Replies
0
Views
2K
WHEELSFEELS
W
W
Black Friday Starts now. DISCOUNT INSIDE
Replies
0
Views
3K
WHEELSFEELS
W
W
Heads up: Labor Day deal just dropped: DISCOUNT + FREE shipping
Replies
0
Views
7K
WHEELSFEELS
W
8
5th Gen Brake Upgrade
Replies
6
Views
2K
Drcoffee
Drcoffee

Members online

Total: 358 (members: 1, guests: 357)

Forum statistics

Threads
278,316
Messages
3,554,107
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top