Bilstein 5100's Coil Relacement

TrueBlue

TrueBlue

New member
Hey guys, just ordered my demello front bumper and was wondering if I could swap the coils on my bilsteins to some heavier rated coils. I already have a slight amount of rake and I don't want it to get worse.

Sent from my SM-G935V using Tapatalk
 
Register to hide this ad
I would call up Toytec. Their coils are made by Eibach I believe and are very high quality. they have a HD version that will probably get you right where you want to be.
 
TrueBlue said:
Hey guys, just ordered my demello front bumper and was wondering if I could swap the coils on my bilsteins to some heavier rated coils. I already have a slight amount of rake and I don't want it to get worse.

Sent from my SM-G935V using Tapatalk
Click to expand...

aloha friend! old man emu 885 or 886 has a heavier load capacity. 885 for v6 with weight (bumper) or stock v8 and then 886 for v8 and weight (bumper). But id try the people you got the preassembled set from and see what they recommend. I run the 885 on my v6 04 runner with bilstein 5100s and I like it for my needs. keep us posted!
 
Hawaiian Hillbilly said:
aloha friend! old man emu 885 or 886 has a heavier load capacity. 885 for v6 with weight (bumper) or stock v8 and then 886 for v8 and weight (bumper). But id try the people you got the preassembled set from and see what they recommend. I run the 885 on my v6 04 runner with bilstein 5100s and I like it for my needs. keep us posted!
Click to expand...
Will do I ordered em from Bilstein directly but there's a suspension shop near me that I'm gonna try out when I can find some time off from school and work

Sent from my SM-G935V using Tapatalk
 
I've decided I'm gonna order the 886's from Toytec. They don't cost much so why not. My only question for you is will it be alright if I install them before I add the bumper onto them or will I run into any problems? I assume it'll just be stiffer till I mount the bumper in a few weeks but I just want to clarify

Sent from my SM-G935V using Tapatalk
 
Hawaiian Hillbilly said:
aloha friend! old man emu 885 or 886 has a heavier load capacity. 885 for v6 with weight (bumper) or stock v8 and then 886 for v8 and weight (bumper). But id try the people you got the preassembled set from and see what they recommend. I run the 885 on my v6 04 runner with bilstein 5100s and I like it for my needs. keep us posted!
Click to expand...
Meant to reply to you with my last question, still getting used to this Tapatalk thing

Sent from my SM-G935V using Tapatalk
 
TrueBlue said:
I've decided I'm gonna order the 886's from Toytec. They don't cost much so why not. My only question for you is will it be alright if I install them before I add the bumper onto them or will I run into any problems? I assume it'll just be stiffer till I mount the bumper in a few weeks but I just want to clarify

Sent from my SM-G935V using Tapatalk
Click to expand...

You will likely be a little nose high. But it shouldn't hurt anything
 
TrueBlue said:
I've decided I'm gonna order the 886's from Toytec. They don't cost much so why not. My only question for you is will it be alright if I install them before I add the bumper onto them or will I run into any problems? I assume it'll just be stiffer till I mount the bumper in a few weeks but I just want to clarify

Sent from my SM-G935V using Tapatalk
Click to expand...

just a tad higher and more sturdy riding. once your bumper is on you should be good to go. they take a while for the new springs to settle in anyhow so you'll feel the difference in a couple months. awesome plan my friend!
 
You must log in or register to reply here.

Members online

No members online now.
Total: 345 (members: 0, guests: 345)

Forum statistics

Threads
278,310
Messages
3,554,079
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top