Bolt and Nut Sizes

[Diverse4runner]

93 3.0

I need both ends sizes for the front drive shaft. From the T-Case to the Front Diff.

Anyone have any ideas where to find this info?



Uploaded with ImageShack.us

 

[helo-mech]

Drive Shaft Bolts - Driveshaft Parts - 1979-1995 Hilux | Pickup | 4Runner - Toyota Parts

 

[Clone of the Mean]

Probably a 10, 11, 12 13, or 14 mm. I'd go with the 12 or 13mm. I usually have all of the above next to me.

 

[ajohnson]

14mm, and I think 1.25 thread pitch.

 

[fourwd1]

Toyota only uses 6, 8, 10, and 12 mm bolts.

The drive shaft bolts are M8x1.25, about an inch long with about a 3/8 inch shoulder.

 

[Clone of the Mean]

I assumed you were talking wrench sizes????

 

[tundrayetti]

I'm pretty sure he needs replacement hardware bud. I mean, if I needed to know what size wrench to use, I'd probably just carry a handful of wrenches to the truck and do some good ol' trial and error.....rather than run inside to the computer.

Wouldn't you?

 

[ChildrenOfBodom]

All my driveshafts use 14mm nut and bolt

 

[fourwd1]

14mm is more than 1/2", your driveshaft must be off of a tractor trailer.

 

[Clone of the Mean]

I'm pretty sure he needs replacement hardware bud. I mean, if I needed to know what size wrench to use, I'd probably just carry a handful of wrenches to the truck and do some good ol' trial and error.....rather than run inside to the computer.

Wouldn't you?

Yeh, I would. But everyone has their day.... I just answered the question, didn't think too much into it.

 

[tundrayetti]

But everyone has their day

Cheers to that my man! Been there plenty of times myself.