Bought a stock 2001 Sport two weeks ago and...
- Thread starter Hepar
- Start date
Hepar
New member
The 2nd set is kind of the reason why it's taking so long to get them on. It's a set for my friends Tacoma. We've been really good friends since grade school and been modding each others rides since we could drive. I told him I'd wait until we could get them on together and he now lives about an hr and a half away with two little ones and quite the busy schedule.
I also haven't been good about lighting a fire under his a$$ to get them done either.
Hepar
New member
Well...
arty:
On a side, Four_Flusher presented me with an amazing deal on a new S/C. After well over a week of going back and forth on the idea, I decided that I am going to keep the engine nice and stock. Why mess with a good thing? We'll see if I'm kicking myself for passing on the chance later...
arty:On a side, Four_Flusher presented me with an amazing deal on a new S/C. After well over a week of going back and forth on the idea, I decided that I am going to keep the engine nice and stock. Why mess with a good thing? We'll see if I'm kicking myself for passing on the chance later...
BigFishAllDay
New member
:reddance: AT LAST!
Those came out cherry man. Looks like you got them up nice and tight too. They flow really well with the tube bumper and I think they tie it all together a bit more. :bigok:
Those came out cherry man. Looks like you got them up nice and tight too. They flow really well with the tube bumper and I think they tie it all together a bit more. :bigok:
Hepar
New member
Thanks guys. A long time coming for sure.
Hahahahaha! I deserve that for sure.
four flusher
New member
well done
bet you need that non slip stuff for loading your boards? looks good!
bet you need that non slip stuff for loading your boards? looks good!
Hepar
New member
Bingo. Plus I figured it would protect the paint a bit from the repeated stepping up and down on. I know they're supposed to get scratched up, but I'm slightly OCD.
Speaking of boards, I just picked up this guy. Cheap(ish) 8' funboard for when the waves are on the small side.
Hepar
New member
Thanks. And tell me about it...
josh.bunch
New member
I don't guess you have gotten a chance to beat those things up yet have you? Did you go with DOM or HREW for those sliders. I really like the way they look and they are very affordable too.
Hepar
New member
I haven't. And to be honest, they're probably not going to see much use outside of some light to medium trails (or parking lot protection). I'm not super into crawling, which is why I went with the HREW. No need for the added strength.
Hepar
New member
Got them off of ebay from a seller with the name streetune. Was actually quite surprised at the quality of them. I was expecting them to be pretty cheap feeling for $30.
theizzardking
New member
holy cow man i didn't know you got your sliders? and where did you get that board from? my buddy nico is a shaper here , we should all go out to the coast one day this summer
blcktpgsr
New member
since when did OE 5 stars become lug-centric type?, regarding the Procomp wheels, you want to get the lug-centric type or the non hub-centric wheels, any aftermarket rims for that matter.
The hubs bore diameter on our trucks measure 108mm.
Procomps non hub-centric wheel bore diameter is also 108mm.
My brother mistakenly ordered the hub-centric wheels only to realize it won't fit on the truck because of the wheels smaller 100mm bore hole. fail!:sobbing:
We had to use some 1/4" wheel spacers in order to make the wheels fit flush, now the wheels are centered only by the lugs as well.
