Brake problem !!

[fatman1]

I have a problem with the brakes on my 1987 turbo 4Runner, the vehical has been sitting for a couple of years.

So I installed new calipers,wheel cylinders,shoes, pads and a master cylinder flushed brake line filled with new fluid, bled system everything is good.

went for a test ride everythings good after a couple miles front brakes start smoking wheels wont turn! opened bleeder let pressure off wheels turn go a couple miles same thing whats up?

 

[4runner_kid]

I don't know the issue, but i want to know what people think. Free bump.

 

[fourwd1]

My guess, the master cylinder.
IIRC there should be a residual valve for the front calipers, to keep a little pressure on them at all times. Could be it is not working properly, keeping full pressure on them.

 

[fatman1]

found the problem bled the mechanical anti loc device on the rear and adjusted the break pedal and all is fine. thanks for the in put

 

[fourwd1]

An 87 doesn't have anti-lock brakes, so I'm guessing you mean the LSPV.
Can't see how that would lock up your front brakes, but getting it working is what matters.