-
If you plan to post to Classified forums, you must follow these rules, or your post will be deleted.
- Thread title must include at a minimum: FS or FT, Item(1st, 2nd, 3rd, 4th or 5th gen), Price and Location. For Example: FS: 4th GEN Carpet Floor Mats - Tan, $50 Denver, CO.
-
All Threads must contain the following information
- What is for sale/trade (model, specs, etc.)
- Condition
- Price/What you want to trade for
- Location of item
- At least one picture of the item for sale or for trade
- No "Feeler" Threads - Its either for sale or it isn't.
- Moderators lock Classified Threads that have not had any activity in 90 days or when the part is announced SOLD.
- Threads not complying with the rules will be deleted without notice.
Build your own Bandit Bumper - STEVENSVILLE MI
- Thread starter Bandit Runner
- Start date
KrzyKjun512
New member
Bumper
Sent a message as well.
Sent a message as well.
I am selling custom front and rear bumper plans based on the bumpers I built for my third gen 4Runner. The front bumper mounts and winch plate are 1/4” thick steel. The front bumper mounts directly to the 4Runner frame, using a total of 14 bolts. The frame rail ends will need to be cut off, similar to mounting an ARB bumper. These bumpers are designed to fit all standard (non integrated solenoid) 8-10K winches. I will provide you with all necessary information in order to build your own bumper. This includes:
- Detailed component and assembly drawings
- CAD files
- Materials list
- Step by step build instructions with pictures
Your front bumper design can be customized in the following ways at no extra cost:
- Body lift height (Eliminate that ugly gap between the bumper and body)
- Flare width (Match your bumper width to your flares)
- Hoop Design (Standard, PreRunner, Center only, none, etc)
- Material Thickness (Keep it light, or go heavy duty)
- Fog/driving light openings (round PIAA, square Rigid Dually, none, etc)
- Turn signal openings (round, oblong, none, etc)
Front bumper pics:
I am also selling the rear bumper design, as many of my customers have been asking for this for quite a while. The rear bumper also uses 1/4” thick mounting features, and uses 8 bolts in which to mount it. It also has an integrated 2” receiver. Customization for body lifts and flare widths are also included.
Rear bumper pics:
I also have several swing-out tire carrier options for the rear bumper. I have both single swing-arm designs and dual swing-arm designs. Options include ladder, 5-gallon jerry cans, Rotopax cans, Hi-Lift jack mounts, or custom items.
Single swing-arm pics:
Dual swing-arm pics:
The prices are as follows:
Front bumper design = $125
Rear bumper design (No swing-arm) = $125
Single swing-arm for rear bumper = add $35
Dual swing-arm for rear bumper = add $50
If you purchase a front and rear bumper at the same time, I will knock $50 off the total cost.
If you purchased a bumper design from me previously, and would now like to purchase a second design, I will knock off $25.
Take all the guess work out of building your own bumper. Just cut out the parts and weld them together according to the instructions. To make it even more simple, you can even have a shop cut the parts out for you on a waterjet, from the CAD files supplied.
These 3rd gen 4runner bumpers are both stylish and functional. I have sold many of these designs over the past several years, and have never had any complaints. I spend a good deal of time on each design to ensure that the customer is completely satisfied.
Please PM me if you are interested (include your email address), and I will send you some more information.
Thanks,
Bandit Runner
Do you still sell the rear bumper plans
Bandit Runner
Senior Member
Yes. Sent you a PM.
llamadingo
New member
sending you a PM
Hi - sending you a PM regarding your rear bumper plans. Thank you.
Hi - sending you a PM regarding your rear bumper plans. Thank you.
Bandit Runner
Senior Member
bump. still selling bumper designs.
Bandit Runner
Senior Member
Sorry, 3rd gen only.
patkelly4370
New member
I was chatting with my neighbor and I mentioned there being DIY bumper plans.
He's a retired welder and is pitching for a project. He said by the time we're done I'd be good at welding.
Alas, I have a 5th gen.
Sent from my SM-G955U using Tapatalk
He's a retired welder and is pitching for a project. He said by the time we're done I'd be good at welding.
Alas, I have a 5th gen.
Sent from my SM-G955U using Tapatalk
Bandit Runner
Senior Member
Post your email address here. Or get with a moderator and have them get your PM's working.
Thanks.
Bandit Runner
Senior Member
Thanks man! PM me if you want to chat sometime.
Thank you. Looking for both the front and rear bumper plans. [email protected]
Sent from my SM-G955U using Tapatalk
Sent from my SM-G955U using Tapatalk
shifting gears and
New member
I am to am interested.
CruelHellraiser
New member
Jerry cans
Will the single swingarm hold the weight of 2 5 gallon jerry cans and 33" tire with hi jack mount?
Will the single swingarm hold the weight of 2 5 gallon jerry cans and 33" tire with hi jack mount?
Bandit Runner
Senior Member
Bandit Runner
Senior Member
Yes, it will.
Similar threads
