MTN4RNR
New member
Big Sur Weekend - April 2019
Thank you! Glad you have enjoyed the thread :thumb3::jaw: you always take amazing photos.
:clap2:
Central Coast, south of Big Sur.Great pic! Where along the Coast was that?
Me too! I just ticked over 63k last weekend coming back from the Eastern Sierra.Love this rig.
How many miles have you put on it now?
Well that's a compliment if I ever heard one, referring to the SPR reference :whoo:Holy hell, I feel like I just got done watching the opening scene of Saving Private Ryan. This build is intense!! I've already knocked out a few of them on my own, but there are many more I want to explore after reading through this. And I've been thinking of swapping over to the TRD Pro wheels, but you've made me rethink this since you've been running the stock trail wheels this whole time. Have they held up looks-wise?
Beautiful. Near Prewitt Ridge?
A good friend and well seasoned outdoor traveller put it to me this way once:
If you know.... you know.... If you don't and want to know, keep looking....
Inyo National Forest is a haven for the weekend warrior. With a wealth of terrain and a heavy network of roads, there are endless opportunities for routes to take and places to post up for the night. Click the link below for more on my weekend in the Eastern Sierra.
Inyo Adventures - May 2019
![]()
![]()
![]()
![]()
This DIY post has been relocated to my website. Please see the link below for the original post in it's entirety!
Rear Differential Breather(s) Relocation
I just did this mod this morning over a cool, refreshing Sierra Nevada Summer Fest and I’m now ready for some water crossings! I also may have just opened a second one... oops!
My plan was to run it into the engine bay in case any diff fumes decided to filter their way up the hose, but in playing with the idea of your install I accidentally pushed the rubber grommet out while poking around in the tire jack storage.... so I just went with that, instead.
I popped the bumper off just enough to get access to the hole and slathered the tubes with electrical wire lube and it all went in fairly easy. I didn’t replace the grommet, but I will probably shoot a layer of mastic around the tubes from the inside to seal everything up.
The hardest part for me was getting the hose length correct for the locker. I cut the damn thing about 10 times before I finally felt comfortable with the end result (the attached pic shows how it was bending the locker tube). Before that, it was either too close to the heat shield or it was bending the existing hose over and possibly pinching it closed. No buneo! I finally got it just right, so I’m content.
Cheers to a fun, cheap mod!
Great photos!
My fiancee and I travel/backpack quite a bit in the Eastern Sierra. If you're ever out there, hit us up if you'd like!
For the holiday weekend, we made a quick get away to the Sierra for a night of camping... Little did we know that the mosquitos would be out in force, but we didn't give up!
Mosquito Camping - July 2019
![]()
![]()
![]()
When you bring the new truck home, and the lift gate doesn't clear the overhang... Custom limiting strap, installed. Uses a Nite-Ize CamJam XT on the d-ring in the corner, and a carabiner attached to the lift gate strap.
Function>Form
![]()