Bunch of idiot lights came on after I put suspension back on

[Enzo4370]

So I took off my icon stage 1 coilovers to get them re-built/re-charged. All is good there. Fixed. Got them back on. As I turn truck on I notice I'm getting a constant ABS light. Constant traction control light and a blinking green 4wheel drive icon. I've driven truck and it drives fine but not sure why all these lights are on and I can't get them off. Did I blow a fuse while swapping the suspension? But the weird part is I hooked up a code reader to my truck and it says there are no faulty codes. Says it's good. Maybe I have a faulty code reader but used it recently and it worked well. What's your take???

 

[RyanEJ25]

I think it's the abs wire. I read around that it caused this issue.

 

[Trixx]

Same thing happened to me. I did a search and found out it has also happened to a million other people, all with 100% identical results. Broken ABS wire every. single. time.

 

[TEujunga]

Yup, broken ABS wire. Here's one of the more popular threads on the topic:

https://www.toyota-4runner.org/5th-gen-t4rs/175037-need-help-asap-uca-install-abs-related.html

 

[Enzo4370]

Thanks for the quick help. Any one have a good link to where I can get some replacement ABS wires so i can get it fixed this weekend? Or if someone has a video link handy on the replacement. Gonna try and complete the thread for the next guy looking.

 

[jrob]

Definitely an ABS Sensor wire. Broke mine earlier this year while installing Camburgs. With a hard departure deadline to Colorado two days out, I didn't have time to source them online. The local dealer wanted $180 for the sensor harness. I actually asked the guy on the phone if he was fu**ing with me.

So I cut out the broken section and soldered in some fresh wire, heat shrinked everything, then covered in scotch coat/vulcanized tape. Working like a champ, and I've seen some pretty severe conditions with the truck since.

Good luck.