C4 Fabrication Rock Sliders Group Buy

[C4 Fabrication]

Is it to late to get in on this?

Sorry the GB closed about 3 weeks ago and we have already turned down at least 5 people that have tried to get GB pricing since then.

 

[C4 Fabrication]

[MENTION=135421]Ohio_Steve[/MENTION]
[MENTION=133328]Alaska_4Runner[/MENTION]
[MENTION=138696]LandoSystem[/MENTION]

Your orders shipped out yesterday. All others towards the top of the list will be getting picked up from powder coat this week and hopefully shipped by the end of the week.

 

[C4 Fabrication]

Hey everyone, i stopped by the powder coating shop last night and picked up 4 sets of completed sliders. There were 4 more sets on the rack. One pair was finished and cooling, the second pair was blasted and ready for coating. Here are couple pics for everyone!

 

[brentfamily1]

Hey everyone, i stopped by the powder coating shop last night and picked up 4 sets of completed sliders. There were 4 more sets on the rack. One pair was finished and cooling, the second pair was blasted and ready for coating. Here are couple pics for everyone!

Awesome, can you post a new list that removes the drop outs and has shipment status on it? I have an off road trip planned at Interlake, IN on July 8-10th and would like to know probability of having sliders by then.

Sent from my HTC One_M8 using Tapatalk

 

[C4 Fabrication]

Awesome, can you post a new list that removes the drop outs and has shipment status on it? I have an off road trip planned at Interlake, IN on July 8-10th and would like to know probability of having sliders by then.

Sent from my HTC One_M8 using Tapatalk

Yes we will update this info as soon as the powder coated sliders start to ship.

 

[MagnumSG]

Yes we will update this info as soon as the powder coated sliders start to ship.

Any new info on shipping .

 

[popey]

Yes we will update this info as soon as the powder coated sliders start to ship.

Do you have an update for everyone?

Thanks!

 

[C4 Fabrication]

Any new info on shipping .

Do you have an update for everyone?

Thanks!

We will update at the end of the week once we finish packaging and shipping this big group of sliders we have been working on this week. There will be about 13 more sets shipped by Friday evening.

 

[C4 Fabrication]

Alright guys, here are all of the orders that shipped this week. If you are on the original list before one of these other orders, but your order has not shipped yet, It is because powder coating still needs to be completed before we can ship your order.
All orders will be shipped to the freight dock nearest your location unless you provided a commercial address. The dock will call you when the shipment arrives to tell you where to pick it up. If you cannot get to the dock right away, the shipment can left there until you are available to come pick it up.
Some of the first orders we sent are attached to the pallet with lag screws so you will need a 7/16" wrench to remove them if you need to dis-assemble the pallet at the dock.
[MENTION=134723]kSteven813[/MENTION]
[MENTION=132510]DarthRaider[/MENTION]
@dell
[MENTION=106556]alico268[/MENTION]
[MENTION=140792]halflife78[/MENTION]
[MENTION=132887]popey[/MENTION]
[MENTION=135196]BRODIN[/MENTION]
[MENTION=140827]RWB_Runner[/MENTION]
@Ohio_Hawk
[MENTION=61739]sirhamlet[/MENTION]
[MENTION=119309]FlyingScout[/MENTION]
[MENTION=140581]SOLRUS[/MENTION]

 

[C4 Fabrication]

Alright guys, here are all of the orders that shipped this week. If you are on the original list before one of these other orders, but your order has not shipped yet, It is because powder coating still needs to be completed before we can ship your order.
All orders will be shipped to the freight dock nearest your location unless you provided a commercial address. The dock will call you when the shipment arrives to tell you where to pick it up. If you cannot get to the dock right away, the shipment can left there until you are available to come pick it up.
Some of the first orders we sent are attached to the pallet with lag screws so you will need a 7/16" wrench to remove them if you need to dis-assemble the pallet at the dock.

[MENTION=134723]kSteven813[/MENTION]
[MENTION=132510]DarthRaider[/MENTION]
@dell
[MENTION=106556]alico268[/MENTION]
[MENTION=140792]halflife78[/MENTION]
[MENTION=132887]popey[/MENTION]
[MENTION=135196]BRODIN[/MENTION]
[MENTION=140827]RWB_Runner[/MENTION]
[MENTION=139465]Ohio Hawk[/MENTION]
[MENTION=61739]sirhamlet[/MENTION]
[MENTION=119309]FlyingScout[/MENTION]
[MENTION=140581]SOLRUS[/MENTION]

 

[halflife78]

Sent you an email...

 

[C4 Fabrication]

Sent you an email...

responded

 

[brentfamily1]

Alright guys, here are all of the orders that shipped this week. If you are on the original list before one of these other orders, but your order has not shipped yet, It is because powder coating still needs to be completed before we can ship your order.
All orders will be shipped to the freight dock nearest your location unless you provided a commercial address. The dock will call you when the shipment arrives to tell you where to pick it up. If you cannot get to the dock right away, the shipment can left there until you are available to come pick it up.
Some of the first orders we sent are attached to the pallet with lag screws so you will need a 7/16" wrench to remove them if you need to dis-assemble the pallet at the dock.

[MENTION=134723]kSteven813[/MENTION]
[MENTION=132510]DarthRaider[/MENTION]
@dell
[MENTION=106556]alico268[/MENTION]
[MENTION=140792]halflife78[/MENTION]
[MENTION=132887]popey[/MENTION]
[MENTION=135196]BRODIN[/MENTION]
[MENTION=140827]RWB_Runner[/MENTION]
[MENTION=139465]Ohio Hawk[/MENTION]
[MENTION=61739]sirhamlet[/MENTION]
[MENTION=119309]FlyingScout[/MENTION]
[MENTION=140581]SOLRUS[/MENTION]

Thanks for the update. I know I am on the bottom of the original list, when do you estimate my shipment? In August?

 

[C4 Fabrication]

Thanks for the update. I know I am on the bottom of the original list, when do you estimate my shipment? In August?

Since yours are bare steel, there will be no wait time for powder coating, so yours will most likely be ready to ship by the end of next week.

 

[brentfamily1]

Since yours are bare steel, there will be no wait time for powder coating, so yours will most likely be ready to ship by the end of next week.

We added powder coat to my invoice actually.

Sent from my HTC One_M8 using Tapatalk

 

[C4 Fabrication]

We added powder coat to my invoice actually.

Sent from my HTC One_M8 using Tapatalk

i must have missed something on the master list. I will be sure that we get them coated, glad you mentioned it! That will of course push back your shipping date. We are going to get the last group of 7 sliders all coated at the same time. So we will finish building them this week, then get them coated the following week, then they will ship the week after that. So all of the final powder coated slider orders will end up getting shipped around 7/18-7/22.

 

[brentfamily1]

i must have missed something on the master list. I will be sure that we get them coated, glad you mentioned it! That will of course push back your shipping date. We are going to get the last group of 7 sliders all coated at the same time. So we will finish building them this week, then get them coated the following week, then they will ship the week after that. So all of the final powder coated slider orders will end up getting shipped around 7/18-7/22.

OK, thanks for the ETA. Have a great 4th!

Sent from my HTC One_M8 using Tapatalk

 

[C4 Fabrication]

OK, thanks for the ETA. Have a great 4th!

Sent from my HTC One_M8 using Tapatalk

Thanks you too!

 

[DarthRaider]

:banana:

Got a call today and was able to pick up my C4 Fab Rock Sliders. As you can see, once we removed it from the pallet, it fit perfectly in the back of my 4Runner. More pictures to come.

 

[Boyds4Runner]

:banana:

Got a call today and was able to pick up my C4 Fab Rock Sliders. As you can see, once we removed it from the pallet, it fit perfectly in the back of my 4Runner. More pictures to come.

Thanks for the pictures. It looks like the pallet could have fit in too?

Or, I will have to find a set of bolt-cutters from Harbor Freight for the one time I will need them.

Congratulations! Don't forget to show us when you have them mounted too!