Calling Tristate area 3rd geners PA/MD/NJ

[Opi]

im in for that date, im completely stock and in the process of moving so my time an dmoney are limited but wheeling stock is just as fun to me :cowboy:

 

[YotaZach85]

im in for that date, im completely stock and in the process of moving so my time an dmoney are limited but wheeling stock is just as fun to me :cowboy:

You should be ok especially if theres still snow on the ground that weekend because we'll most likely stick to greens and low blues. I would like to hit some blacks if there isnt any snow but we can stick mostly to greens and blues if anyone isnt comfortable with running blacks. I have one buddy with a 3rd gen said he's down, he's lifted on 33s, rear elocker and some armor so I know he'll be down with running a few blacks.


Oh, and for anyone that is looking for help with a lift just let me know, it only takes a few hours and I am always willing to help out. I work at Universal Technical Institute and I can get in on the weekends so tools and equipment arent a problem, mount and balance tires and alignment can all be done too and I dont charge much :wink2:

 

[KellyJ]

You should be ok especially if theres still snow on the ground that weekend because we'll most likely stick to greens and low blues. I would like to hit some blacks if there isnt any snow but we can stick mostly to greens and blues if anyone isnt comfortable with running blacks. I have one buddy with a 3rd gen said he's down, he's lifted on 33s, rear elocker and some armor so I know he'll be down with running a few blacks.


Oh, and for anyone that is looking for help with a lift just let me know, it only takes a few hours and I am always willing to help out. I work at Universal Technical Institute and I can get in on the weekends so tools and equipment arent a problem, mount and balance tires and alignment can all be done too and I dont charge much :wink2:

Hey I might have to take you up on some of your services / we should get a wheeling group together. I know of a 3rd gen and 2 5th gen's within 30 mins of me that would be down for a trip to Rausch. Do you have access to welding tools? / could you do sliders?

 

[LINY4Runner]

You should be ok especially if theres still snow on the ground that weekend because we'll most likely stick to greens and low blues. I would like to hit some blacks if there isnt any snow but we can stick mostly to greens and blues if anyone isnt comfortable with running blacks. I have one buddy with a 3rd gen said he's down, he's lifted on 33s, rear elocker and some armor so I know he'll be down with running a few blacks.


Oh, and for anyone that is looking for help with a lift just let me know, it only takes a few hours and I am always willing to help out. I work at Universal Technical Institute and I can get in on the weekends so tools and equipment arent a problem, mount and balance tires and alignment can all be done too and I dont charge much :wink2:

I'm always down for some blacks! 1C, Trail 5 and 22 are among my favorites...oh and crawl daddy! and the gauntlet!
ahhhh I'm getting excited! :bigok:

 

[YotaZach85]

Hey I might have to take you up on some of your services / we should get a wheeling group together. I know of a 3rd gen and 2 5th gen's within 30 mins of me that would be down for a trip to Rausch. Do you have access to welding tools? / could you do sliders?

The only thing I dont have or have access to is a tubing bender, I'm still waiting on a bender to finish the sliders I made for my truck. I can fab a little but I'm not an expert at it so if you're just looking for someone to weld them on for you I can definitely help there.

I'm always down for some blacks! 1C, Trail 5 and 22 are among my favorites...oh and crawl daddy! and the gauntlet!
ahhhh I'm getting excited! :bigok:

Yes! I dont know any of the trail names other than yellow jacket and hills and bowls but I'll try anything at least once! My truck is still open/open but it gets along pretty good, it may not look pretty doing it but it usually gets it done.

 

[Opi]

You should be ok especially if theres still snow on the ground that weekend because we'll most likely stick to greens and low blues. I would like to hit some blacks if there isnt any snow but we can stick mostly to greens and blues if anyone isnt comfortable with running blacks. I have one buddy with a 3rd gen said he's down, he's lifted on 33s, rear elocker and some armor so I know he'll be down with running a few blacks.


Oh, and for anyone that is looking for help with a lift just let me know, it only takes a few hours and I am always willing to help out. I work at Universal Technical Institute and I can get in on the weekends so tools and equipment arent a problem, mount and balance tires and alignment can all be done too and I dont charge much :wink2:

sweet sweet and sweet. if my latest stock takes off the way i hope it does i may be sending you a pm to do a lift and some tires come spring time :thumb3:

 

[LINY4Runner]

The only thing I dont have or have access to is a tubing bender, I'm still waiting on a bender to finish the sliders I made for my truck. I can fab a little but I'm not an expert at it so if you're just looking for someone to weld them on for you I can definitely help there.



Yes! I dont know any of the trail names other than yellow jacket and hills and bowls but I'll try anything at least once! My truck is still open/open but it gets along pretty good, it may not look pretty doing it but it usually gets it done.

I've run every trail there (except the reds) when I was open/open...4Runners are beast!
Yellowjacket is legit too! Monster wheelies halfway up! Hahaha

 

[YotaZach85]

sweet sweet and sweet. if my latest stock takes off the way i hope it does i may be sending you a pm to do a lift and some tires come spring time :thumb3:

Sounds good to me man.

I've run every trail there (except the reds) when I was open/open...4Runners are beast!
Yellowjacket is legit too! Monster wheelies halfway up! Hahaha

My first time up there with my 4Runner my buddies saw Yellow Jacket and went up it with their Jeeps which are all welded in the rear and I didnt think I would be able to do it but she went right up it! My avatar is from Yellow Jacket..

 

[LINY4Runner]

My avatar is from Yellow Jacket..

haha look at that, it is! that's the spot where the passenget front comes up real high and the pass rear drops off and you get sick-nasty wheelies...my facebook default is from 1C

 

[djbrand1]

Mid-March works for me!

 

[KellyJ]

The only thing I dont have or have access to is a tubing bender, I'm still waiting on a bender to finish the sliders I made for my truck. I can fab a little but I'm not an expert at it so if you're just looking for someone to weld them on for you I can definitely help there.

Cool, that would be legit. I'm just waiting for a set of Savage assembled sliders to come in - they'll just have to be welded on the truck as far as I know (well, and paint them too -- When I'm painting them, should I paint the sliders and then have them put on or vice versa?) I dunno how much you're charging but let me know if you'd be willing too (havent gotten a quote for IPOR putting them in, but I'm guessing somewhere in the $200 range.)

 

[YotaZach85]

Cool, that would be legit. I'm just waiting for a set of Savage assembled sliders to come in - they'll just have to be welded on the truck as far as I know (well, and paint them too -- When I'm painting them, should I paint the sliders and then have them put on or vice versa?) I dunno how much you're charging but let me know if you'd be willing too (havent gotten a quote for IPOR putting them in, but I'm guessing somewhere in the $200 range.)

I would go ahead and paint them except for the last inch or so on the legs that get welded to the truck. If you're only looking to get the sliders welded on I wont be charging $200, maybe $75 and some :beer:. I'm looking to help out as much as possible but still make a little extra scratch on the side.

 

[Opi]

Im excited about this, I'll edit my first post with the info as we plan it!

 

[Opi]

edited! :beer:

 

[YotaZach85]

edited! :beer:

:cheers: I'm ready for it! You can add YotaFun to the list, too. I don't know how frequently he visits here but he said he was down.

 

[Opi]

:cheers: I'm ready for it! You can add YotaFun to the list, too. I don't know how frequently he visits here but he said he was down.

done! looks like its $35 a person for the day?

 

[KellyJ]

I would go ahead and paint them except for the last inch or so on the legs that get welded to the truck. If you're only looking to get the sliders welded on I wont be charging $200, maybe $75 and some :beer:. I'm looking to help out as much as possible but still make a little extra scratch on the side.

Sounds like a deal to me, much appreciated. Shoot me a PM when you're available - I'd either make a wheeling trip out of it or a day trip. Delaware isn't too too far from me.

 

[Opi]

Sounds like a deal to me, much appreciated. Shoot me a PM when you're available - I'd either make a wheeling trip out of it or a day trip. Delaware isn't too too far from me.

i put you as a yes though im not really sure, you definitely comin?

 

[LINY4Runner]

done! looks like its $35 a person for the day?

It's a $10 annual membership fee and $35 per day park fee for truck and driver, additional $7 per passenger.
Also plan on a hotel room or two depending on how many heads we have, cheap to bunk up together but I may be bringing my girl so we'll be in our own room :bigok:

 

[KellyJ]

i put you as a yes though im not really sure, you definitely comin?

We talking about the 19th? If so, I should be up and running by then. I'm just talking with YZ about getting some sliders put on for what sounds to me is a reasonable price.