Catalytic Shield

[anniesball72]

Has anyone had any luck finding a cat. shield similar to Millercat? I have been looking and inquiring to many manufacturer's with no luck. I'm not interested in the cable catalytic convertor lock.

 

[pluton]

I've looked, like you. I consider the skidplate-like undercover to be the only realistic solution. I'd happily pay $450 for a ready-made piece that I could install myself. I've considered asking to have a custom plate made. Only personal inertia has prevented me from investigating further.

 

[jgue467]

I had my muffler guy weld the cat on, then weld rebar all around it in about 0 places.

SURE it can still be stolen yet they'll need to make lots and lots of noise to do so, have fun guys.

Its a cheap solution for a cheap cat, about 140 online, big deal.

 

[Bad Luck]

I had my muffler guy weld the cat on, then weld rebar all around it in about 0 places.

SURE it can still be stolen yet they'll need to make lots and lots of noise to do so, have fun guys.

Its a cheap solution for a cheap cat, about 140 online, big deal.

How many places?

 

[brillo_76]

I think I would probably just go with plate armor. [ frame rail to frame rail skid plates] to protect the cats. Using special bolt heads that were recesed in. Then it would be too much work to get to them and they would move on to easier ones.



Sent from my SM-A505U using Tapatalk

 

[phattyduck]

I think I would probably just go with plate armor. [ frame rail to frame rail skid plates] to protect the cats. Using special bolt heads that were recesed in. Then it would be too much work to get to them and they would move on to easier ones.

I don't think you would even need special bolts - they are carrying a sawzall, not a socket set!

-Charlie

 

[brillo_76]

I don't think you would even need special bolts - they are carrying a sawzall, not a socket set!

-Charlie

Your probably correct. I just figured recessed in bolts they cant saw the heads off the bolts..

 

[pluton]

I had my muffler guy weld the cat on, then weld rebar all around it in about 0 places.

SURE it can still be stolen yet they'll need to make lots and lots of noise to do so, have fun guys.

Its a cheap solution for a cheap cat, about 140 online, big deal.

Assuming your 2001 is the same as my 97 (?), couldn't they just cut in front of, and behind, the rebar/cat rig, and pull out ≈7 feet of exhaust tubing with the cat attached?