CB Drifter Mounts for 3rd gen

MMK21

MMK21

New member
I know people here have made drifter mounts in the past, but I haven’t been able to find an active thread. Is anyone making them currently for us 3rd gens?
 
Register to hide this ad
MMK21 said:
I know people here have made drifter mounts in the past, but I haven’t been able to find an active thread. Is anyone making them currently for us 3rd gens?
Click to expand...

The "Drifter" mounts were made by me, and I don't have anything left at the moment. These were a 2 piece design with "Speed Holes", and a 1 piece design that had the T4R logo in it.

I have a minimum order on these, and would entertain making another batch if there was enough interest.

Mike
 
MStudt said:
The "Drifter" mounts were made by me, and I don't have anything left at the moment. These were a 2 piece design with "Speed Holes", and a 1 piece design that had the T4R logo in it.

I have a minimum order on these, and would entertain making another batch if there was enough interest.

Mike
Click to expand...

I’d get on board for one.
 
MStudt said:
The "Drifter" mounts were made by me, and I don't have anything left at the moment. These were a 2 piece design with "Speed Holes", and a 1 piece design that had the T4R logo in it.

I have a minimum order on these, and would entertain making another batch if there was enough interest.

Mike
Click to expand...

The T4R one is the one I’d like if you make them again. Mike, what would be the minimum needed for a group buy?
 
MMK21 said:
The T4R one is the one I’d like if you make them again. Mike, what would be the minimum needed for a group buy?
Click to expand...

I'll have to check. I can have them cut where I work now, but I'll have to buy a 4'x4' sheet. Let me look into it this week, and I'll let you know.

Mike
 
I'll be able to run another batch of these with the T4R logo on them. These will be the original 2 piece design this time around. The picture below is just for show.

If you're interested please post here, and I'll let everyone know once I have an idea on when they'll be ready. I may start a Group Buy for these, and tag each member that's interested.

Pricing will be the same as always, will include shipping just like always, and that's $55 for either side. If you want both sides that price will get better.


[MENTION=101389]MMK21[/MENTION] [MENTION=148218]JZiggy[/MENTION] [MENTION=169299]Run4Runnerr[/MENTION]
 
Last edited:
fblainen11 said:
I'd be interested as well. Do you have any photos of these installed, [MENTION=98153]MStudt[/MENTION]?
Click to expand...

fblainen11 said:
For the sake of capitalism, do you have any photos of yours installed, [MENTION=102266]SRQ-Runner[/MENTION] ?
Click to expand...

They all mount the same way since there are only 2 screw holes to use. You can compare that design to mine, and see that the mount is the exact same.

I'll have to dig up some pictures, but you can Google 3rd Gen 4runner Drifter Mount. This mount was originally done by Outdoor Logic, and then I took the mount over from them a few years ago. That's why you'll see some with the ODL logo on them, some with the T4R logo, and others with just the speed holes.

Mike
 
[MENTION=98153]MStudt[/MENTION] I'll take one

Driver side please

I have all of my CB stuff ready to go except the mount. I've been looking through a bunch of different options....magnet mounts etc. This should work fine.
 
You must log in or register to reply here.

Members online

Total: 288 (members: 2, guests: 286)

Forum statistics

Threads
278,307
Messages
3,554,048
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top