check engine "p0306" when cold

doodledo824

New member
well i know it's a cylinder "6" misfire. if i reset the ecu code it will only trigger cold. idle is about lumpy and sputtery when cold at idle. I replaced all 6 plugs and the coil in that particular bank. problem still exists. when warm cars runs and idles flawlessly. Even if i shut it off and turn it on warm runs perfect. Help please.
 
Register to hide this ad
well i know it's a cylinder "6" misfire. if i reset the ecu code it will only trigger cold. idle is about lumpy and sputtery when cold at idle. I replaced all 6 plugs and the coil in that particular bank. problem still exists. when warm cars runs and idles flawlessly. Even if i shut it off and turn it on warm runs perfect. Help please.

Move the #6 coil to another cylinder and see if the code follows the coil.
 
what stumps me is that it runs perfect and won't trigger a code during warm start up. Warm start ups are smooth and it doesn't sputter. When cold it's lumpy and sputter but only for about a minute. Once everything is warm everything is perfect.
 
yeh they are saying gas but i run super since company pays for gas..lol shhh don't tell them..

i've googled this and it could be a host of things. I don't think it's anything that serious because if it was i'm sure it would run like shit all that time. i've read alot about the injector and even catalytic converter.
 

Members online

Forum statistics

Threads
278,304
Messages
3,554,041
Members
248,016
Latest member
Advally Service

Trending content

Back
Top