pendragon
New member
1999 4runner, 2.7 L 3RZ-FE, 230K miles. I have an external transmission cooler installed, so no pink milkshake possible.
I had an overheating incident in my 4Runner a little while ago and the vehicle was immediately shut off as soon as it redlined. The coolant reservoir was dry. I tracked a coolant leak down to a hose going to the EGR valve and I went ahead and replaced the EGR valve, the egr hoses, and the radiator, thermostat, and radiator hoses since they needed to be replaced anyway. Prior to this I think I had a little coolant leak into one of the spark plug cylinders, because I have a little bit of a misfiring problem on startup that goes away after about 10 seconds or so, which makes me think it's coolant in one of the spark plug well that's getting cooked off. I don't think the overheating incident warped my head (or warped it much) but I wanted to mention it. The misfiring on startup seems to be getting a little worse as time goes on.
I sent a oil sample to Blackstone labs and this is what came back:
I guess my question is where should I go from here? What's the best way to approach getting this diagnosed and fixed?
I had an overheating incident in my 4Runner a little while ago and the vehicle was immediately shut off as soon as it redlined. The coolant reservoir was dry. I tracked a coolant leak down to a hose going to the EGR valve and I went ahead and replaced the EGR valve, the egr hoses, and the radiator, thermostat, and radiator hoses since they needed to be replaced anyway. Prior to this I think I had a little coolant leak into one of the spark plug cylinders, because I have a little bit of a misfiring problem on startup that goes away after about 10 seconds or so, which makes me think it's coolant in one of the spark plug well that's getting cooked off. I don't think the overheating incident warped my head (or warped it much) but I wanted to mention it. The misfiring on startup seems to be getting a little worse as time goes on.
I sent a oil sample to Blackstone labs and this is what came back:
[: Your suspicions of coolant in the oil have been confirmed with these results. You can see the contaminant in the high potassium and sodium. The head gasket is one likely source of the leak, but it will take a closer investigation to know for sure. The good news is that wear looks pretty good, so coolant doesn't appear to be causing serious wear issues at this point. Aluminum was a little high, coming from parts like pistons or bearings. Keep oil changes short (<3,000 miles) until you can get it checked out. Universal averages show typical wear after ~6,700 miles use.
I guess my question is where should I go from here? What's the best way to approach getting this diagnosed and fixed?