-
If you plan to post to Classified forums, you must follow these rules, or your post will be deleted.
- Thread title must include at a minimum: FS or FT, Item(1st, 2nd, 3rd, 4th or 5th gen), Price and Location. For Example: FS: 4th GEN Carpet Floor Mats - Tan, $50 Denver, CO.
-
All Threads must contain the following information
- What is for sale/trade (model, specs, etc.)
- Condition
- Price/What you want to trade for
- Location of item
- At least one picture of the item for sale or for trade
- No "Feeler" Threads - Its either for sale or it isn't.
- Moderators lock Classified Threads that have not had any activity in 90 days or when the part is announced SOLD.
- Threads not complying with the rules will be deleted without notice.
Cornfed 2.5/1.5 spacer lift with shocks and springs
- Thread starter whoosh
- Start date
Register to hide this ad
The fj springs give it 1/4 to 1/2 more lift depending on if yours is v6, v8, 2wd or 4x4. If yours is v8 4wd then a little more than a 1/4, if it's v6 2wd then around 1/2 from what I've heard. I had them on my v8 4x4 and was a little more than 1/4. Anyway, all together about 2 3/4 to 3 inches of lift depending on setup. The setup felt good too. I really like the Cornfed lift and loved the ride of it. I just got extended travel coilovers so I'm selling it. Feel free to pm, text or call my cell#602-818-3545 with anymore questions.
thanks
Justin
From my research that I did 2 months ago, the rear springs provided almost 1.5 to 2 times as much lift as the front. For that reason I didn't want the rear fj springs. In my opinion the 4runner sat perfect with this setup. The front was no higher than the rear and the ride was very good. There are a few write ups on it so read away and let me know and feel free to ask me any questions.
pm sent!!!
MercuryEvo
New member
I was looking for a cornfed 3/2 kit.
So for 250$ I would get:
Front cornfed 2.5" kit with the FJ springs which would provide me about a 2.8" lift (I have an 07 4wd V8)
Rear cornfed 3" kit.
Spacers for the rear?
please verify all of that
So for 250$ I would get:
Front cornfed 2.5" kit with the FJ springs which would provide me about a 2.8" lift (I have an 07 4wd V8)
Rear cornfed 3" kit.
Spacers for the rear?
please verify all of that
You would get the front 4runner shock, front FJ spring, 2.5" spacer. This combined should get about 2.8" lift in front. For the rear you would get a 1.5" cornfed spacer. Let me know if you have anymore questions. Thanks
MercuryEvo
New member
ok but the rear 1.5" spacer is good for 3" of lift right?
Could you do 250 shiped for everything to NY?
As far as I know the 1.5" spacer is to provide 1.5" of lift to level out the 4runner. If you're asking does it provide 3" of actual lift, then I believe the answer is no because then the rear wouldn't be level with the front, which is what most lifted vehicles are going for. Feel free to ask more questions.
In regards to price, I'm sending you a PM
