Cylinder Locks for front doors and tail gate

[kpnavarro]

I just bought a 1995 4runner and the locks only work on the drivers side door and the key wont even roll down the window on the tail gate. Can i buy new locks keyed for all three? I have just seen locks for the two front doors only. Any help would be great. Thanks in advance

 

[4runnerBrett]

I was having similiar issue as yours so i got a key made for my vin number and sprayed wd40 in all the locks and they all work great now. So try wd 40 and see if that helps.

 

[kpnavarro]

Is the back window/tailgate a different lock then the front doors and how much did it cost to get a new key at the dealer using your vin

 

[4runnerBrett]

The guy gave me key for free because they were out of keys that i wanted but i believe its around 10 dollars depending on the key style you choose. But issue with mine was i think they goy sticky from not being used and so the new key and wd40 loosened them up.

 

[Fj40]

Mine where the same way. I gave them a shot of silicone and they work great. On that note it's not a bad idea to get a can of white grease and do all your window rollers and and metal tracks. It will save your motors and money down the road.

 

[Fj40]

Is the back window/tailgate a different lock then the front doors and how much did it cost to get a new key at the dealer using your vin

Same key unless the lock has been replace at some point.

 

[RGraff]

WD 40 works great as an initial lubricant but tends to attract dirt and grime over time and has the potential for eventually gumming up the works. Most of the graphite based products works great and won't attract dirt. The plain old dry "powder" version of graphite is my favorite for exterior locks.