DIY for gear swap?

[swapmeet]

Is there a DIY for upgrading the gears, specifically on the front dif?

 

[zidaro]

i followed this one to swap the front third on my 2010 Tundra. Was mostly similar.

2nd gen tacoma- ECGS- Toy 8'' IFS Diff removal + ARB - TTORA Forum

heres my pics of the swap i did on my Tundra. Rear and Front. Starts on page 19 of the Thread
'10 Tundra CrewMax - Page 19 - Expedition Portal

Hope that helps some.

aaron

 

[swapmeet]

i followed this one to swap the front third on my 2010 Tundra. Was mostly similar.

2nd gen tacoma- ECGS- Toy 8'' IFS Diff removal + ARB - TTORA Forum

heres my pics of the swap i did on my Tundra. Rear and Front. Starts on page 19 of the Thread
'10 Tundra CrewMax - Page 19 - Expedition Portal

Hope that helps some.

aaron

Thanks man!

Now if I can just find info on opening the clamshell! :biggrin1:

 

[Be_Original]

i followed this one to swap the front third on my 2010 Tundra. Was mostly similar.

2nd gen tacoma- ECGS- Toy 8'' IFS Diff removal + ARB - TTORA Forum

heres my pics of the swap i did on my Tundra. Rear and Front. Starts on page 19 of the Thread
'10 Tundra CrewMax - Page 19 - Expedition Portal

Hope that helps some.

aaron

I appreciate both references, they were great help.

 

[zidaro]

I pulled my thirds, then sent them off to Just Differentials to have the gears swapped and lockers installed. As capable as i am playing with my Toys, some work is best left for the Pros.
Call Carl.