Eclipse AVN6620 Map
- Thread starter 1MZ-V8
- Start date
Register to hide this ad
I had the blinking volume problem when I installed the Eclipse bluetooth kit. In my case moving the wire harness position away from other wires cured it. The mute wire seems to be very sensitive to external glitches.
The moderators have stated that they do not want any public bootleg disk discussions so PM me.
The moderators have stated that they do not want any public bootleg disk discussions so PM me.
The wire is the pink wire called cell phone mute. If it is not being used, I would cut it off leaving about one inch so that it could be spliced to if it is ever needed.
There seems to be a slight delay on the mute since I got the vol showing but rarely was the audio muted. In my case moving the bluetooth harness completly cured the problem
You can go to Eclipse's web site and download the install manual with the wiring diagrams.
There seems to be a slight delay on the mute since I got the vol showing but rarely was the audio muted. In my case moving the bluetooth harness completly cured the problem
You can go to Eclipse's web site and download the install manual with the wiring diagrams.
I do not see anything on eclipse's site, however i see it on Parrot's, and they do not have the 06+ 4Runner only showed the 91-00 4Runner.
http://www.parrot.com/documents/en/support/schemasdinstallation/pdf/Pin%20out%20Toyota.pdf
I don't seem to see the Pink wire here.
I guess I have to take it apart and look for it when I have time.
http://www.parrot.com/documents/en/support/schemasdinstallation/pdf/Pin%20out%20Toyota.pdf
I don't seem to see the Pink wire here.
I guess I have to take it apart and look for it when I have time.
pictures?
Sorry, don't mean to thread jack - but can you guys send or post pictures of your head unit with the dash kit you've used? I'm planning to get the 6620 shortly, but haven't decided on the dash kit yet. It does not appear my search for the urban runner trim piece is going anywhere. Thanks!
Sorry, don't mean to thread jack - but can you guys send or post pictures of your head unit with the dash kit you've used? I'm planning to get the 6620 shortly, but haven't decided on the dash kit yet. It does not appear my search for the urban runner trim piece is going anywhere. Thanks!
I had my head unit out and I had the blinking problem and I could not totally eliminate it by moving the harness like before.
I added a 1 microfarad 16v electrolitic capicator from the mute wire to ground and it totally eliminated the problem. I surmise the line is very high impeadence and it was picking up engine glitches on the truck wiring.
I added a 1 microfarad 16v electrolitic capicator from the mute wire to ground and it totally eliminated the problem. I surmise the line is very high impeadence and it was picking up engine glitches on the truck wiring.
This is unrelated topic but ever since I put the AVN6620 in I have been getting CEL and all other lights come on. Do you know what might have cause this?
This happens to me before when I used to have the AVN6610 but I have corrected by double checking the wires. however i try to repeat the same on the AVN6620 but without any luck.
any suggestion/recommendation ?
This happens to me before when I used to have the AVN6610 but I have corrected by double checking the wires. however i try to repeat the same on the AVN6620 but without any luck.
any suggestion/recommendation ?