Extra space in radio opening after Pioneer AVIC install

[thumper]

Well, I just got done putting my F700bt in my 4th gen. But now I've got these two little slot shaped gaps on both sides of my radio.

Does anyone know of any trim kits or anything to fill in these gaps?

I was thinking these might be what I need:
DASHKITS METRA 95-8202 Dash kit for mounting an aftermarket radio Toyota Multi application radio installation Kit For double DIN or stacked ISO mount units Will accomodate Double-DIN or Dual ISO mount;

I'll get pics posted to better explain my situation.

 

[riceandpho]

depends if ur car camed with jbl, and also if its a base stereo, theres 2 kits i use, the metra is what i use, and there is american international, one will work better than the other.

 

[thumper]

depends if ur car camed with jbl, and also if its a base stereo, theres 2 kits i use, the metra is what i use, and there is american international, one will work better than the other.

No JBL....base stereo. The wiring wasn't the issue, that's done. I just want the open space to disappear

 

[riceandpho]

just get the metra kit, i think the sosche kit will show the sides more.

 

[thumper]

Well, I just got done putting my F700bt in my 4th gen. But now I've got these two little slot shaped gaps on both sides of my radio.

Does anyone know of any trim kits or anything to fill in these gaps?

I was thinking these might be what I need:
DASHKITS METRA 95-8202 Dash kit for mounting an aftermarket radio Toyota Multi application radio installation Kit For double DIN or stacked ISO mount units Will accomodate Double-DIN or Dual ISO mount;

I'll get pics posted to better explain my situation.

 

[H1_VLTG]

A nice option is the Urban Runner Radio Trim Piece, it will completely fill up that spot. Only catch is the trim piece is a little pricey, I think in the neighborhood of $80.

 

[li_runner]

You're correct they are what you need.

 

[Offroader5]

If the pieces out of the urban runner are that pricey...I'd go with aftermarket like the Metra. I'm not too sure of the brand...but when I ordered my Kenwood from Crutchfield, they threw in those two pieces to fill the gaps. Maybe give Crutchfield a call and ask them about the brand or even see how inexpensive it is to buy it from them.

 

[silverbullet07]

Crutchfield uses Metra, Toyota/Scion In-dash Receiver Kit Fits select 2000-up models Chassis size DD at Crutchfield.com

I have a unused set setting here beside me now because I choose to use the urban 4runner trim. The urban 4runner trim looks much better then the Metra fillers, but at a much higher cost.

 

[4RunnFunn]

Crutchfield uses Metra, Toyota/Scion In-dash Receiver Kit Fits select 2000-up models Chassis size DD at Crutchfield.com

I have a unused set setting here beside me now because I choose to use the urban 4runner trim. The urban 4runner trim looks much better then the Metra fillers, but at a much higher cost.

Would you please post pictures of your install using the Urban 4Runner trim...Thanks!

 

[silverbullet07]

Would you please post pictures of your install using the Urban 4Runner trim...Thanks!

They are in this thread,

http://www.toyota-4runner.org/audio...dio-backup-camera-audio-controls-project.html

 

[Trevloc]

id make your own. its easy and customizable...

http://www.toyota-4runner.org/4th-gen-t4rs/80044-trevlocs-thread.html#post685358

 

[4RunnFunn]

Trevloc...thanks for the link to your thread...very nice stuff in there! :cheers: