Fj springs with revtek 3&2.5 lift???

[srs034runner]

Right now I have the Revtek 3 and 2.5" lift with bilstien 5100's ... Can I install the fj springs as well? Will it work or will it be too much? What are the pros and cons of this swap with my current setup?

 

[srs034runner]

Btw I have v8 and awd

 

[jbdahlke]

I have the revtek and moog fj springs in the front. 39" to bottom of fender well front and back. Mine is v6 but Arb bumper probably equals v8. This is with stock struts
<a href="http://s216.photobucket.com/user/bigdalk/media/Mobile%20Uploads/image_zps2rhvlyzz.jpeg.html" target="_blank"><img src="http://i216.photobucket.com/albums/cc178/bigdalk/Mobile%20Uploads/image_zps2rhvlyzz.jpeg" border="0" alt=" photo image_zps2rhvlyzz.jpeg"/></a>

 

[srs034runner]

What if I did moog fj front and rear springs??

I have the revtek and moog fj springs in the front. 39" to bottom of fender well front and back. Mine is v6 but Arb bumper probably equals v8. This is with stock struts
<a href="http://s216.photobucket.com/user/bigdalk/media/Mobile%20Uploads/image_zps2rhvlyzz.jpeg.html" target="_blank"><img src="http://i216.photobucket.com/albums/cc178/bigdalk/Mobile%20Uploads/image_zps2rhvlyzz.jpeg" border="0" alt=" photo image_zps2rhvlyzz.jpeg"/></a>

 

[morphious]

I just removed my FJ front coils today and replaced them with my stock coils still set max. I felt the ride was a bit too harsh with Bill's at max and FJ coils. I will give it a few days to see how I like them, but I was getting very little up travel before the swap.

 

[srs034runner]

My springs are a little saggy I think and I just don't know if since that's the case whether I should just upgrade to fj or go stock what are my options ... I'd like a little more height... Give me your thoughts!

I just removed my FJ front coils today and replaced them with my stock coils still set max. I felt the ride was a bit too harsh with Bill's at max and FJ coils. I will give it a few days to see how I like them, but I was getting very little up travel before the swap.

 

[having fun]

I know when I had that same spacer kit on stock coils and struts for 3 yrs. and changed to 5100 and OME coils (3" lift) my front gained about 1-1.25" again. Stock coils do sag a lot.

 

[srs034runner]

So replace all front and rear springs is the consensus with fj coils?

I know when I had that same spacer kit on stock coils and struts for 3 yrs. and changed to 5100 and OME coils (3" lift) my front gained about 1-1.25" again. Stock coils do sag a lot.

 

[having fun]

So replace all front and rear springs is the consensus with fj coils?

It wouldn't hurt as far as the front. Not sure how much more lift the FJ coils give. Personally, I wouldn't go over 3" lift overall total.

 

[morphious]

My springs are a little saggy I think and I just don't know if since that's the case whether I should just upgrade to fj or go stock what are my options ... I'd like a little more height... Give me your thoughts!

I lost about 1 inch in height when I swapped back but the ride is much more relaxed. With FJ's in front my wheel well gap was 6.5", now I'm at 5.5". The rear with FJ's are at about 7".

 

[srs034runner]

I'm stuck, I mean I want to do all corners but I'm afraid I get the rear up too high I'll start binding stuff up...? The front is a definite, the sag is bad lol