FJ80 Wheels and lugnuts

B

BobLMTDT4R

New member
I just got my FJ80 wheels finally put on my 4Runner. The tech at the tire ace said I may want to make sure I have the correct lugnuts for the wheel. Do I have to swap out lugnuts from a 4Runner to a Land Cruiser type? The washer around the lugnuts now is loose. I kinda want to switch over to black lugnuts anyway.

Thanks
Bob
 
Register to hide this ad
When I switched from the split spoke wheels to the LC wheels I had to get new lug nuts. It seems odd that the tech wouldn't know the correct lugs for the style wheel. I have also heard that only some LC wheels have different lug nuts than the 4Runner but haven't seem it first hand.
 
This has been covered quite a few times. '93 & '94 LC80 wheels use tapered seat lugs. '95+ LC80 wheels use the mag seat lugs, which are the same lugs all 3rd gens come with.

acorn-mag-ball-seats.jpg~original
 
You can easily tell because the 93-94 wheels had a black steel insert in the wheel that the lug nut would go on top of. The 95-97 were all aluminum. I have the 94 wheels and ordered a set of lug and locks from wheelers off road for fairly cheap.
 
I would question the tech if he said that. cause I would think any style would work in an emergency to get home, but its pretty obvious that a lug nut is the right one or not.

I just put my LC wheels on and am very happy with them. but I got lucky on when I bought the wheels that I didn't have to change out the lug nuts.

what color did you go with?

pics are always good when you do something to your runner, cuase we like to share the excitement with you. :driving: here is a pic of mine minus the caps
 

Attachments

  • Bozeman-20110624-00031.jpg
    Bozeman-20110624-00031.jpg
    139.6 KB · Views: 10,588
Last edited:
Pics will be posted tonight to tomorrow...I promise. I've done alot since the lift.
So I need to order 12 x 1.5 lug nuts in acorn or ball/round shape? Also am I safe to drive on the lug nuts I have now?

Thanks
Bob
 
BobLMTDT4R said:
Pics will be posted tonight to tomorrow...I promise. I've done alot since the lift.
So I need to order 12 x 1.5 lug nuts in acorn or ball/round shape? Also am I safe to drive on the lug nuts I have now?

Thanks
Bob
Click to expand...

You are safe to drive on the lug nuts you have for now.
 
Looking at a set of these Fj80 16x8 on craigslist. Will bolt right on with the correct lugs?

I read they do not clear the tundra brakes, I had not done this upgrade yet but was thinking about it.
 
Blue Seat Lyfe said:
Looking at a set of these Fj80 16x8 on craigslist. Will bolt right on with the correct lugs?

I read they do not clear the tundra brakes, I had not done this upgrade yet but was thinking about it.
Click to expand...

Can confirm this style does not clear the tundra brakes. I use a 1" wheel adapter to solve that.

EDIT:
This is the Land Cruiser wheel I am referring to, with the acorn lug nuts.... (should have posted this earlier, sorry!)
P5272556_zps2b52d713.jpg~original
 
Last edited:
habanero said:
Can confirm they do not clear the tundra brakes. I use a 1" wheel adapter to solve that.
Click to expand...

Thanks, rotors are def warped so I will be doing my first brake job...more likely Ill get scared and have my mechanic down the street do it. May just replace with 4Runner standard.
LC wheels are $180 which I think is a good deal for a set of 4.
 
Blue Seat Lyfe said:
Looking at a set of these Fj80 16x8 on craigslist. Will bolt right on with the correct lugs?

I read they do not clear the tundra brakes, I had not done this upgrade yet but was thinking about it.
Click to expand...

habanero said:
Can confirm they do not clear the tundra brakes. I use a 1" wheel adapter to solve that.
Click to expand...

Depends on what year and lug type the LC wheels are. The 93-94 acorn style lug do not clear the 231 brakes, but the 95-97 washer style lugs do clear the 231's. Confirm what type they are then go from there.
 
Thanks [MENTION=53337]SCRunner12[/MENTION], I've posted a pic of the wheel I am referring to in my original post and repaired the wording....got stuck on the style I have, as if there's any other...pfft.
 
habanero said:
Thanks [MENTION=53337]SCRunner12[/MENTION], I've posted a pic of the wheel I am referring to in my original post and repaired the wording....got stuck on the style I have, as if there's any other...pfft.
Click to expand...

thanks, Ill be sure to check which style lugs these are when I meat up with the craigslister
 
Hey guys sorry to drag up an old thread, but just found a set of these rims for sale and want to know if they will clear the 231mm brakes? I noticed habanero said his do not clear the Tundra brakes, but I'm not sure if these are the same rim?

From rjaudi's post I would say these are the ones with the black insert (93-94) but not too sure. We only got these rims on the 'Blue Marlin' Limited Edition 80 Series Landcruiser (from what I can find only 500 were released in Australia) so they don't come up too often and I would love to grab them for my Surf, but don't feel like driving 2 hours to find out they don't fit!

$_20.JPG
 
You must log in or register to reply here.

Members online

No members online now.
Total: 333 (members: 0, guests: 333)

Forum statistics

Threads
278,310
Messages
3,554,080
Members
248,016
Latest member
Advally Service

Share this page

Trending content

Back
Top