fog light retrofit (Finally Done!!) pics on page 2

[Johns06yota]

more pics

more pics

 

[Johns06yota]

extra pics

extra pics

 

[Johns06yota]

I got mine done about two days ago. They’re amazing. I’ll post pics after John does. Don’t want to jack your thread, man. Trust me. You’ll be happy with them

How did yours turn out? I'm interested to see how you mounted them

 

[Samm25]

How did yours turn out? I'm interested to see how you mounted them

Dude. Yours look sick. Mine aren't as professional. I just took out the fog light housing and drilled holes to bolt and tie down the aftermarket ones. Here's how they turned out

Sent from my SM-N960U1 using Tapatalk

 

[riceandpho]

very nice, still need to aim them tho. thats alot of foreground lighting.

 

[Johns06yota]

Dude. Yours look sick. Mine aren't as professional. I just took out the fog light housing and drilled holes to bolt and tie down the aftermarket ones. Here's how they turned out


Sent from my SM-N960U1 using Tapatalk

Thanks man! and yours turned out really good too. These were the perfect size for our 4runners

 

[Johns06yota]

very nice, still need to aim them tho. thats alot of foreground lighting.

Thanks! and yeah I just ran out of time yesterday. Luckily with how I made these, I retained the oem light adjustment screw on the back so that they can be adjusted properly

 

[Monisio]

do you or anyone here known if these fog lights fit my 17 4runner limited? I bought the custom headlights from hidretrofitkit but planning to get custom fog lights too. Also those led halo rings are just white color or they change colors too? Please advise, thank you.

 

[Johns06yota]

do you or anyone here known if these fog lights fit my 17 4runner limited? I bought the custom headlights from hidretrofitkit but planning to get custom fog lights too. Also those led halo rings are just white color or they change colors too? Please advise, thank you.

I don't believe so because these are almost flat and the 17 4runner fog lights are pretty slanted. If you want to use these I would take some measurements of your oem ones first to see the size. These are 3.78 inches in diameter. If you arent wanting to do any fab work, morimoto makes a similar fog light for the 17 4runner.

https://www.carid.com/morimoto/proj...n-lf220.html?singleid=1209888249&url=89195738

And the halo rings on these are only white

 

[DZNUTS]

They look great, but what are you doing for thermal management?


Sent from my iPhone using Tapatalk

 

[Johns06yota]

They look great, but what are you doing for thermal management?


Sent from my iPhone using Tapatalk

Thanks! and when I had to feed through the 9006 connector I had to drill out the back side of the housing. This also served to allow heat to escape and cool air to enter.

 

[Flash Runner]

After a lot of fiberglass, drilling, sanding, painting and test fitting, they are finally complete. The pictures don't do it justice at all but it looks amazing

Nicely done OP, definitely took the time for a professional install.

Dude. Yours look sick. Mine aren't as professional. I just took out the fog light housing and drilled holes to bolt and tie down the aftermarket ones. Here's how they turned out

Do you have any pictures oh how you installed yours [MENTION=96696]Samm25[/MENTION] ?

 

[Johns06yota]

Nicely done OP, definitely took the time for a professional install.

Thanks! I really appreciate it!

 

[Samm25]

Nicely done OP, definitely took the time for a professional install.



Do you have any pictures oh how you installed yours [MENTION=96696]Samm25[/MENTION] ?

I don't have any photos of the installation but I'll tell you it was ghetto, Haha. What I did is removed the entire fog light housing, the one John used to cut and place the new fog lights in, I just removed it entirely and with the big empty slot it leaves, I drilled a few holes on the side and used zip ties to tight that shh down. Like I said, ghetto, but they don't move at all and it saved me a bunch of time.

I'll try to grab some pics and put them up later today. If I had the time and tools I would've had John give me an entire write up of how he did his because it looks much more professional haha

Sent from my SM-N960U1 using Tapatalk

 

[neurotictim]

Well, now I have another thing to add to my "to do" list. Off to Amazon!

 

[toyoman25]

I did that before and they’re a little blinding and the light output is spread all over the place. They don’t necessarily give out that nice clean cut for LED bulbs, they’re just bright. Once the OP posts pics of how they turned out for him, you’ll see. Trust me.

I just swapped the bulbs to LED and had no issue....Amazon/ebay LEDs are trash....If you want a good site let me know