FREEDOMEDIA Build - Hawaii

[DeepSea]

Time for a peacock camping trip Nate..

I’ll be up there this weekend with the kids...

Damn bro I didn't see this till today but we had my son's 5th bday that weekend anyway. Keep me posted on the next one!

 

[DeepSea]

New video of our offroad excursion here at Kaena Point State Park - Oahu

<iframe width="560" height="315" src="https://www.youtube.com/embed/pid3-tB5NqU" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>

 

[anomalous]

New video of our offroad excursion here at Kaena Point State Park - Oahu

<iframe width="560" height="315" src="https://www.youtube.com/embed/pid3-tB5NqU" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>

Nice video :thumb:

 

[bds_brad]

1st immediate mod was lift and tires. I got sponsored by Eibach and SPC to use their parts on my YouTube channel under the truck build section. I did not get a wheel/tire sponsor but do have a dealer account with 4WheelParts so it made it a little bit cheaper than full retail (If any of you guys are on Oahu, I can get you a better deal as well). Went with 285/70R17 KM2 on ProComp 17x9 Vertigo Wheels. Here is the video we did:

<iframe width="853" height="480" src="https://www.youtube.com/embed/bLOa-Pi4W1I?rel=0" frameborder="0" allowfullscreen></iframe>

In this video they show installing a 1/2" upper strut spacer on the driver side. Did they install one on the Passenger side as well? If so was this to achieve a full 3" lift in the front without having to pre-load the spring?

 

[DeepSea]

In this video they show installing a 1/2" upper strut spacer on the driver side. Did they install one on the Passenger side as well? If so was this to achieve a full 3" lift in the front without having to pre-load the spring?

Yes, to have a full 3" lift without preloading the coils and both sides were done

 

[DreamRun08]

hey DeepSea, I'm trying to put a meet together for Labor Day Monday September 3rd for all generation 4runners. Most likely meet at Maunalua Bay or Sandy's. Let me know if your down.
invite whoever

 

[DeepSea88]

Sorry brother I'm up in San Diego. Won't be able to make it. I transfer soon too and things will be all over the place for me. Please take a ton of pics for me though! HOOYAH DEEPSEA!!!

 

[Momentum4Runner]

1st immediate mod was lift and tires. I got sponsored by Eibach and SPC to use their parts on my YouTube channel under the truck build section. I did not get a wheel/tire sponsor but do have a dealer account with 4WheelParts so it made it a little bit cheaper than full retail (If any of you guys are on Oahu, I can get you a better deal as well). Went with 285/70R17 KM2 on ProComp 17x9 Vertigo Wheels. Here is the video we did:

<iframe width="853" height="480" src="https://www.youtube.com/embed/bLOa-Pi4W1I?rel=0" frameborder="0" allowfullscreen></iframe>

Hello!

I know your 4Runner is probably much different now from when you made this post but did you have to do any body modifications to run the 17x9 Vertigo's with the 285/70/17's? I'll be doing the Eibach lift this week.

Thanks in advance.

 

[DeepSea]

hey DeepSea, I'm trying to put a meet together for Labor Day Monday September 3rd for all generation 4runners. Most likely meet at Maunalua Bay or Sandy's. Let me know if your down.
invite whoever

Yeah bro can be for sure. Sandy's side by Irmas so we can get a stretch of beach to 4x4 down

 

[DeepSea]

Hello!

I know your 4Runner is probably much different now from when you made this post but did you have to do any body modifications to run the 17x9 Vertigo's with the 285/70/17's? I'll be doing the Eibach lift this week.

Thanks in advance.

Just the standard front mud flap removal, push the inner fender liner forward, and trim the bottom plastic part of front bumper fender. No BMC (Body Mount Chop) though

 

[TRDoffroa]

Sweet rig

 

[Momentum4Runner]

Recently installed Mickey Thompson 295/70R17 MTZP3 on SCS SR8 Wheels. Really stoked to say the least. My favorite tire size now as I have ADD when it comes to wheels/tires. Started with stock then lifted my 4R with 285/70 KM2 to 305/65 Deegan 38 to 285/75 Nitto Ridge Grapplers to now these 295/70. I'm officially done with changing tires out Thankfully I have a dealer account with 4WheelParts so tires are basically swapped out as I resell them for cost.

Hello! Will these TRD Wheel caps fit your previous Procomp Vertigo wheels? I have those Vertigo wheels and would like a flat cap option like these TRD's. If they do not fit, do you have any recommendations?

 

[DeepSea]

Hello! Will these TRD Wheel caps fit your previous Procomp Vertigo wheels? I have those Vertigo wheels and would like a flat cap option like these TRD's. If they do not fit, do you have any recommendations?

Sorry but I'm not sure about that fitment. They fit perfect on the SCS wheels though

 

[78-FJ40]

Great looking rig. What were the specs on the ProComp Vertigo 17 x 9 when you were running that set? I see a few different back spacing options and want to get the look same as your set up then. BTW...are you running spacers? Thanks and great looking rig.