Front pass window woes

[Poorboy64]

Hello all,
99 limited front pass. Window is acting strange, it rolls up n down with the key in the on position (not in one touch mode only rolls down 1/2 way) from both drivers and pass side switch. When the truck is running the window will not operate just a clicking from internal door.
I have performed all the reprogramming procedures I have searched.
I did have to replace the battery in the last week?
Any one encounter this problem, any ideas?

Thanks,

 

[gamefreakgc]

I've had to clean the driver's switch before. It does get pretty dirty and the contacts stop working as they should. If that doesn't do it replace with a used unit from a junkyard or off Ebay.

 

[Poorboy64]

Took the drivers and pass. Switches out and apart to clean them, the ones on a limited look nothing like what I found on the net, these look to be all IC not much to clean but did clean what I could, still acts the same. It seems when power is removed from the switch it works with the key in the on position ( but still not in 1 touch mode, when ya start the truck it doesn’t work? At first it just clicks and the window kinda ratchets down a couple mm at a time. Then eventually stops working.
When it does work the motor seems strong it pushes the window up n down with ease, very smooth.
Could this be a BCM issue? A switch issue?