zgensler31
Senior Member
So i my work needs finally outgrew the 4runner and i had to sell it off for a work truck, so parting ways with all of the parts and few accessories that ive collected along the way.
ALL PRICES Are negotiable, and ill ship whatever you want on your dime.
First up I have a yakima roof rail on Q towers i think they call them. Its just the single bar, 2 towers and air dam, stickers are included. the clips and bumpers to mount to a 3rd gen and key are also included.
$75
https://photos.app.goo.gl/e9s4enmlxcCkzt243
full set of 3rd gen weathertech liners, in black. front and rear seats and cago liner.
-sold
no pictures, but youve all seen them. there is nothing wrong with them, they just need cleaned up.
Borla XR-1 muffler that was welded into my pipes for about a year and a half, then cut out and replaced with a full cat back system.
$50
https://photos.app.goo.gl/ksQKJ9wp1qbs83u82
https://photos.app.goo.gl/gW7NUDr2NzS6cBMC3
Spectre remote air filter/air box brand new, never used. was planning on runnning it for a snorkel system with my turbo setup but never got around to installing either.
$25
https://photos.app.goo.gl/LA2VU61ZddbkfH2q2
https://photos.app.goo.gl/Z8DMnqgFjg0UviRp2
https://photos.app.goo.gl/Zh8JlGBqKQOriEG53
Ebay Snorkel head, never installed brand new
-sold
https://photos.app.goo.gl/VWCejQ7XoBeorOS62
98 4runner Ecu-5VZFE 4x4 M/T came with my parts truck from the 5 speed swap and didnt need it for my application.
$45
https://photos.app.goo.gl/GdZvqA1SJmAlVGDe2
https://photos.app.goo.gl/N58T80bCAMyoDcq82
Clutch release switch brand new oem piece purchased for my swap and not needed
$5
https://photos.app.goo.gl/UIwPNoZYvj9Dnnug1
https://photos.app.goo.gl/U6SoYTgPEdtNVczA3
Oil seals from my timing set that i didnt use all oem purchased from camelback
2 cam shaft and front crank seal
-sold
https://photos.app.goo.gl/v6NPxJfzYRpoIWnH2
Intake tube and MAF Sensor, i believe from the 98 donor. clamps are rusty but rubber tube is in good shape and the sensor worked fine when pulled, probably just needs cleaned real quick.
$25
https://photos.app.goo.gl/LbHhxZBrnTKmtGs33
https://photos.app.goo.gl/OgilCQ7r8n9MR5Ix1
Flex Plate from my 96, think its got like 120k on it, no issues or anything just obviously removed for the manual swap.
$10
https://photos.app.goo.gl/bmteoc6LW5uV5NVC3
Chilton and Haynes Manual, chilton is basically brand new other then some over spray on the cover, haynes is used but in good shape, just some greasy edges and dog eared corners. no pages missing or tears.
-sold
https://photos.app.goo.gl/ol3MTz4nGjNlLhRZ2
Photo limit exceeded, will finish in second post...
ALL PRICES Are negotiable, and ill ship whatever you want on your dime.
First up I have a yakima roof rail on Q towers i think they call them. Its just the single bar, 2 towers and air dam, stickers are included. the clips and bumpers to mount to a 3rd gen and key are also included.
$75
https://photos.app.goo.gl/e9s4enmlxcCkzt243
full set of 3rd gen weathertech liners, in black. front and rear seats and cago liner.
-sold
no pictures, but youve all seen them. there is nothing wrong with them, they just need cleaned up.
Borla XR-1 muffler that was welded into my pipes for about a year and a half, then cut out and replaced with a full cat back system.
$50
https://photos.app.goo.gl/ksQKJ9wp1qbs83u82
https://photos.app.goo.gl/gW7NUDr2NzS6cBMC3
Spectre remote air filter/air box brand new, never used. was planning on runnning it for a snorkel system with my turbo setup but never got around to installing either.
$25
https://photos.app.goo.gl/LA2VU61ZddbkfH2q2
https://photos.app.goo.gl/Z8DMnqgFjg0UviRp2
https://photos.app.goo.gl/Zh8JlGBqKQOriEG53
Ebay Snorkel head, never installed brand new
-sold
https://photos.app.goo.gl/VWCejQ7XoBeorOS62
98 4runner Ecu-5VZFE 4x4 M/T came with my parts truck from the 5 speed swap and didnt need it for my application.
$45
https://photos.app.goo.gl/GdZvqA1SJmAlVGDe2
https://photos.app.goo.gl/N58T80bCAMyoDcq82
Clutch release switch brand new oem piece purchased for my swap and not needed
$5
https://photos.app.goo.gl/UIwPNoZYvj9Dnnug1
https://photos.app.goo.gl/U6SoYTgPEdtNVczA3
Oil seals from my timing set that i didnt use all oem purchased from camelback
2 cam shaft and front crank seal
-sold
https://photos.app.goo.gl/v6NPxJfzYRpoIWnH2
Intake tube and MAF Sensor, i believe from the 98 donor. clamps are rusty but rubber tube is in good shape and the sensor worked fine when pulled, probably just needs cleaned real quick.
$25
https://photos.app.goo.gl/LbHhxZBrnTKmtGs33
https://photos.app.goo.gl/OgilCQ7r8n9MR5Ix1
Flex Plate from my 96, think its got like 120k on it, no issues or anything just obviously removed for the manual swap.
$10
https://photos.app.goo.gl/bmteoc6LW5uV5NVC3
Chilton and Haynes Manual, chilton is basically brand new other then some over spray on the cover, haynes is used but in good shape, just some greasy edges and dog eared corners. no pages missing or tears.
-sold
https://photos.app.goo.gl/ol3MTz4nGjNlLhRZ2
Photo limit exceeded, will finish in second post...
Last edited:
