BlairB
New member
Well, forgot to post my location in the title so it looks like my original post was deleted. Lets try this again....
Parts are located in San Ramon, CA
BRAND NEW Camburg 1.25” UCA’s- $600
Never installed. These were originally to replace my 1” UCA’s, but I ended up going long travel before this. Also including a few extra upper rubber bushings from my old set of arms (not pictured). Shipping should run you around $40 anywhere in the US.
Factory LCA's w/ Total Chaos LCA Skids Installed- SOLD
These LCA's have roughly 75k miles on them, and as with any used LCA's I would recommend inspecting/replacing the LBJ's. They also have a set of Total Chaos LCA Skids installed which have a few scrapes but are ready for more abuse!
All Pro 3.5” Lift Springs- $150 (local pickup only)
Dirty and used, but no problems. Ended up going to custom CSS to support my rear bumper, drawers, etc…
Parts are located in San Ramon, CA
BRAND NEW Camburg 1.25” UCA’s- $600
Never installed. These were originally to replace my 1” UCA’s, but I ended up going long travel before this. Also including a few extra upper rubber bushings from my old set of arms (not pictured). Shipping should run you around $40 anywhere in the US.
Factory LCA's w/ Total Chaos LCA Skids Installed- SOLD
These LCA's have roughly 75k miles on them, and as with any used LCA's I would recommend inspecting/replacing the LBJ's. They also have a set of Total Chaos LCA Skids installed which have a few scrapes but are ready for more abuse!
All Pro 3.5” Lift Springs- $150 (local pickup only)
Dirty and used, but no problems. Ended up going to custom CSS to support my rear bumper, drawers, etc…
Attachments
Last edited:
