SEPTEMBER 17th ALL THIS GETS TRASHED
I might have some other items, but until i find them i will not post them.
I have the following left which was taken off my 2006 Limited V8 4Runner around 63k miles. I'd prefer local pickup since i doubt these items have much value. Name your price and pick it up, or if you want me to ship it you must also cover the shipping charge.
[SOLD]Daystar KT09115BK Rear spacer (Driver side lean fix) - I have one of the daystar spacers. These are popular among the 4th gens as it will help fix the driver side lean. The other spacer is on my 4runner.
Daystar KT09115BK 2.5" Strut Spacer - this is the front end only. I dont have the two spacers for the rear anymore. Was on for less than 8k miles.
OEM Rear Springs - never had any issues, I just decided to upgrade to a toytec suspension. I knnow pic only shows one, but i do have both. Both are in the same condition
[SOLD] OEM UCAs - again, nothing wrong. I just wanted to upgrade. One of them has the bolt stuck for the brake line. Just needs to be drilled and retapped.
OEM Front sway bar - Just decided to take it off. Doesnt have the brackets for install. Bushings are still there however
[SOLD]Toytec Front sway bar relocation bracket - never used it, but installed it on my 4runner so i wouldn't lose it
Pics are below:
I might have some other items, but until i find them i will not post them.
I have the following left which was taken off my 2006 Limited V8 4Runner around 63k miles. I'd prefer local pickup since i doubt these items have much value. Name your price and pick it up, or if you want me to ship it you must also cover the shipping charge.
[SOLD]Daystar KT09115BK Rear spacer (Driver side lean fix) - I have one of the daystar spacers. These are popular among the 4th gens as it will help fix the driver side lean. The other spacer is on my 4runner.
Daystar KT09115BK 2.5" Strut Spacer - this is the front end only. I dont have the two spacers for the rear anymore. Was on for less than 8k miles.
OEM Rear Springs - never had any issues, I just decided to upgrade to a toytec suspension. I knnow pic only shows one, but i do have both. Both are in the same condition
[SOLD] OEM UCAs - again, nothing wrong. I just wanted to upgrade. One of them has the bolt stuck for the brake line. Just needs to be drilled and retapped.
OEM Front sway bar - Just decided to take it off. Doesnt have the brackets for install. Bushings are still there however
[SOLD]Toytec Front sway bar relocation bracket - never used it, but installed it on my 4runner so i wouldn't lose it
Pics are below:
Last edited:
