• If you plan to post to Classified forums, you must follow these rules, or your post will be deleted.

    1. Thread title must include at a minimum: FS or FT, Item(1st, 2nd, 3rd, 4th or 5th gen), Price and Location. For Example: FS: 4th GEN Carpet Floor Mats - Tan, $50 Denver, CO.
    2. All Threads must contain the following information
      • What is for sale/trade (model, specs, etc.)
      • Condition
      • Price/What you want to trade for
      • Location of item
      • At least one picture of the item for sale or for trade
    3. No "Feeler" Threads - Its either for sale or it isn't.
    4. Moderators lock Classified Threads that have not had any activity in 90 days or when the part is announced SOLD.
    5. Threads not complying with the rules will be deleted without notice.

FS, AZ: Bilstein 600lb coils (125$), Dobinsons coils(125$), OEM springs and shocks

MAST4R

New member
I am selling my collection of front end springs :)

Bilstein 600lb coils from 6112. Used for a couple thousand miles and only a couple hundred offroad. This coils are meant for a stock front end vehicle. They provide supreme comfort with skid plates and sliders and will do great for most people in most states offorad as well. However, they were a bit soft for my desert and rock use. Replaced with Bilstein 650lb coils. Asking $125. These are NOT for regular shocks!

Dobinsons C59-238. These provided me with 1.25" of front lift with 3/16 skids and sliders. I used them for 7,000 miles and was perfectly happy with them. I like them better than either of my Bilstein pairs but they cannot work with 2.5-2.65" shocks. Asking $125. I am very much inclined to keep them but I don't think I will be going back to smaller shocks.

I also have OEM front springs and shocks from a KDSS 4Runner as well as the rear shocks from the same vehicle. I bought an entire used suspension to have a second set of UCAs and tophats. I already sold the rear springs and I am now selling the rest. I was told the suspension had 12-14,000 miles. You can see on pictures how much better the rear shocks look compared to mine, seriously and often offroaded OEM shocks, which I will keep. I bought the whole thing cheaply so I am selling the parts I don't need accordingly: 50$ for the front coils and the 4 shocks or 20$ for each pair.
 
Last edited:
Register to hide this ad
Ok, then, 100$ for the Dobinsons springs (plus shipping), 100$ for the 600lb Bilstein springs (plus shipping), and 50$ for all components of the stock KDSS suspension (front springs and shocks, rear shocks).
 
Will the Dobinsons fit a 2008 4 runner? what kind of height do they give. I recently ordered bilstein 5100 shocks all around. The kit also came with bilstein rear Coil springs. I chose the 1.7-1.8 height. Not sure if i made a mistake buying the coil springs I haven't seen anyone talk about them. The kit was 510 otd. on bilsteinlifts.com . I dont want to preload my fronts too much. So just curios about what springs i should put up there.
 
Shipping to Virginia? Very interested, will they fit 4th gen? I don't see why they wouldn't but someone might know better than me
 
Shipping to Virginia? Very interested, will they fit 4th gen? I don't see why they wouldn't but someone might know better than me

No idea, but afraid won't be cheap. Also, no idea about the exact fit on a 4th gen.

Which part do you need? The Dobinsons or the Bilstein springs? The latter can only be used with the 6112s.

I could check shipping if you PM me a zip code.
 
Dobinsons SOLD, Bilstein reduced

The Dobinsons have found a good home.

I am reducing the 600lb Bilstein from 125 to 90.

Shipping is normally 30-40 within the lower 48.

I understand these are in low demand because they only work with big shocks, but if you bought 6112s with the 650lb coils and want a softer ride, these are the ticket.
 

Members online

Forum statistics

Threads
278,315
Messages
3,554,131
Members
248,016
Latest member
Advally Service

Trending content

Back
Top