Gibson catback exhaust! **Extended Black Friday sale**
- Thread starter Jason B
- Start date
Jason B
Official Vendor
Jason B
Official Vendor
That was nice of her. She may want to drive it more after she hears it. Not kidding.
Burtman Industries 5th gen Exhaust Link is for the single rear exit.
If you want to dual side, call me text me at 717-319-2100 (it's more than the single of course, but I will help out)
Taco04
Member
Got my exhaust today and after looking at it I should be able to tuck it up a bit higher than the factory set up which is what I was looking for! Curious how it will sound with the URD Y pipe but I can easily fit a resonator ahead of the muffler if I feel it's too loud. Any way Thanks again!
Jason B
Official Vendor
Yes, that's the great thing about this system. There is a ton of adjustment built in that you could have it 1" under the bumper of you wanted, or 4-5" below the bumper. Just loosen the clamps and you can rotate like 90 deg with the clamps.
I also have a Gibson Y PIPE for this same vehicle that works with these exhaust too. Haven't had time to even mention it.
Burtman Industries 4th gen Exhaust Link is for the single rear exit.
If you want to dual side, call me text me at 717-319-2100 (it's more than the single of course, but I will help out)
Just sent you a text from a 917 area code, internested in the dual side in stainless with black ceramic tips.
Jason B
Official Vendor
Great. Yea, sorry guys, Gibson has been rushing this out and hasn't sent me all the FEDEX tracking numbers yet, so there's a good chance you may get it before I get the tracking!
Foques, text or call me at 717-319-2100
Burtman Industries 4th gen Exhaust Link is for the single rear exit. ORder soon, price goes un in Jan.
If you want to dual side, call me text me at 717-319-2100 (it's more than the single of course, but I will help out)
Last edited:
Jason B
Official Vendor
Awesome. Can't wait to see some pics install with the black tip!
walstylez
New member
Me too! I'd love to know if it bothers you inside the cabin as well!
Jason B
Official Vendor
You won't hear it inside. These do not drone
Burtman Industries 4th gen Exhaust Link is for the single rear exit.
If you want to dual side, call me text me at 717-319-2100 (it's more than the single of course, but I will help out)
Well I finally put the exhaust on. My brother and I were able to put in the exhaust and give her an oil change in under 3 hours, so it was pretty easy. It was my first time giving her an oil change and that was way more frustrating then switching the exhaust.
It was too late to get pictures but I think it looks really good. Ill try and post some tomorrow.
This system has little to no drone. It sounds more throaty but not obnoxious. Cruising around town I put my radio volume around 15-20 and I can't even hear it inside. At an idle my K&N CAI is almost louder than the exhaust. This kit is exactly what the wife and I were looking for, Thanks Jason.
It was too late to get pictures but I think it looks really good. Ill try and post some tomorrow.
This system has little to no drone. It sounds more throaty but not obnoxious. Cruising around town I put my radio volume around 15-20 and I can't even hear it inside. At an idle my K&N CAI is almost louder than the exhaust. This kit is exactly what the wife and I were looking for, Thanks Jason.
Received mine yesterday, about 4 or 5 days earlier than expected after speaking with Gibson. Install only took about an hour, and using some DW40 or PB blaster on the rubber hangers makes it exponentially easier to slide them off.
I would say fitment for me right now is about a 8/10. Im getting some contact on the top of the axle where the pipe goes up and over the top of the rear axle. Im very much open to suggestions on how to fix this. Also the pipe only sits about 1/2 an inch away form the spare tire, pretty much making it impossible to carry a larger spare tire which i had planned on.
The sound is great, little to no drone and not too loud. Its definitely putting a smile on my face, just have to tweak the fitment a bit.
I would say fitment for me right now is about a 8/10. Im getting some contact on the top of the axle where the pipe goes up and over the top of the rear axle. Im very much open to suggestions on how to fix this. Also the pipe only sits about 1/2 an inch away form the spare tire, pretty much making it impossible to carry a larger spare tire which i had planned on.
The sound is great, little to no drone and not too loud. Its definitely putting a smile on my face, just have to tweak the fitment a bit.
Jason B
Official Vendor
a few pics of the product:
piping quality seems spot on
hoping to have access to do the install soon.. will post more then
Damn Foques, those are some awesome photos! You could eat off those.
Good deal. Some advice. There is A LOT of play with this system. You can have it so the tip is 1" away from the bumper, or 6" away. That's the neat thing with slip-fit piping. If you need any extra help, email [email protected] and he will help with any install issues you may have.
ALSO, still have these at a great price
Burtman Industries 4th gen Exhaust Link is for the single rear exit.
If you want to dual side, call me text me at 717-319-2100 (it's more than the single of course, but I will help out)
AlblineStar808
New member
is this the actual tip? i thought they were rolled tips? would love the dual side exit exhaust with black tips that are like this one
great looking tip.
hoping to have access to do the install soon.. will post more then[/QUOTE]
great looking tip.
hoping to have access to do the install soon.. will post more then
[/QUOTE]
Jason B
Official Vendor
[MENTION=66994]Foques[/MENTION] any new pics?
ALSO, still have these at a great price
Burtman Industries 4th gen Exhaust
ALSO, still have these at a great price
Burtman Industries 4th gen Exhaust
