Guess the tire size!

[shoeless]

On the verge of picking up a 05 T4R and will have a bit left over to throw at it.
Been researching stuff for days and Ive got a shopping list prepared.
Back and forth on tires until I saw this truck:

I think that sizing looks perfect and I can't figure out what size they are.

Im sure someone has the answer!
Thanks!

 

[shoeless]

Also, if anyone has the specs/build thread on that truck, Id like to have a look!

 

[TNRunner99]

265s on a 17" wheel?

 

[shoeless]

Your thinking 17s?
My guess is 16s and maybe a 285....
another pic:

 

[TNRunner99]

It looks too low to the ground to be 285s. I'm not sure they would fit a 4th gen without 3" of lift and some trimming. But I'm no expert on 4th gens, I have a 3rd gen. You may ask some of the 4th gen guys on here.

 

[Lucky13z]

I see yellow shocks so I'm guessing he's got an OME lift on it. And judging by how much of a downward angle he's got on his cv's it's probably at least a 3" lift. I would think that if that's the case, and depending on the offset of his wheels, 285's wouldn't be out of the question.

 

[Discount Tire]

Those are the original Goodyear Wranger MTR tires in what looks like 285/75R-16.

 

[KidVermicious]

Here's a 3rd gen with 265/75/16 and a 4th with 265/70/17.

Comparing this pic to the OPs pic, I agree with DT, those are 285/75/16s. But why not track down the owner of the 4th gen in the OP and ask him? A truck like that shouldn't be hard to find.

 

[shoeless]

But why not track down the owner of the 4th gen in the OP and ask him? A truck like that shouldn't be hard to find.

This has essentially been my plan all along.
Keep seeing this truck but only on Shrockworks site...or relating to them.
Been dropping the pic here and there hoping someone would know who's it is.
About to buy a 4th gen and would like to know the setup it is running......