Hanma LED Bar Group Buy

[gaterose]

I've recently placed 2 orders from Hanma Lights, in China, for some local off road club guys as well as a few members here on t4r. They're extremely cheap compared to other prices out there, so I figured I'd post a group buy and let more of the community in.

The group buy will end January 31, but if there are enough people who are in a rush we may be able to place an order in a couple of weeks for those who are in a rush.

edit- several people are asking, so if you would be good ordering by 1/15 please put that in your post I'll still do another order at the end of the month for those of you who need to wait.

I posted a feeler thread here - http://www.toyota-4runner.org/4th-gen-t4rs/131810-interest-hanma-led-light-bar-group-buy.html - for anyone looking for a little more info as well as some feedback from previous buyers. I decided to post this in General Discussions in case in non-4th gen folks are interested.

The prices will be as follows (including shipping within USA)-

BC series - Polycarbonate lens, 3W CREE bulbs, thicker housing (these appear to be on par with the name brand bars as far as specs).
7.5" - $80
13.5" - $140
21.5" - $220
31.5" - $300
41.5" - $380
3x3" - $30

B Series - Glass lens, 3W Epistar bulbs
7.5" - $65
13.5" - $115
21.5" - $170
31.5" - $235
41.5" - $300
2x6" - $30

Single Row - Polycarbonate lens, 5W CREE bulbs
10.5" - $110
20" - $180
29.5" - $240
39" - $300


All bars are available in spot, flood, or combo. The lead time will be about 14-15 business days as I'm not making anything and can't afford to keep these in stock.

There are some output pics from the 30" first gen B series bars in this thread - http://www.toyota-4runner.org/4th-gen-t4rs/120687-let-there-light.html all the bars available now are second gen and have better optics. I don't know the lumen ratings, there are ratings for these lights on some sites but I don't trust those ratings (and those were for the 1st gen bars) so I'm not posting them.

Here's a pic of the BC series 30" bar and the 3x3 and 2x6 lights.

(cat not included with any orders)

The B series bars are available from several others around the internet, at a significantly higher cost, but the BC series bars are not available anywhere else as far as I've seen.

Unless you say something it will be assumed that you want a combo bar

edit- some more specs

B Series-
. OperatingVoltage:10-30 DC
. Waterproof rate:IP 67
. 3w high intensity Epistar LEDS
. Color Temperature:6000K
. Material: Diecast Aluminum Housing
. Lens material:Toughed glass
. Mounting Bracket: Alu firm bracket
. Beam: 12 degree Spot Beam; 60 degree flood beam or combo
. 30000 hours abovelife time
.Certificates:CE、 RoHs、 IP67

BC Series -
. Operating Voltage: 10-30 DC
. Waterproof rate: IP 67
. 3w CREE LEDS
. Color Temperature: 6000K
. Material: Diecast aluminum housing
. Lens material: PC
. Mounting Bracket: Alu firm bracket
. Beam pattern: Combo
Flood(90 degree)
Spot (8 degee)

SR -
. OperatingVoltage:10-30 DC
. Waterproof rate:IP 67
. 5w high intensity CREE LEDS
. Color Temperature:6000K
. Material: Diecast aluminum housing
. Lens material: PC
. Mounting Bracket: Zinc Alloy
. Beam: 8 degree Spot Beam, 120 degree flood beam and combo.
. 30000 hours above lifetime
Certificates:CE、 RoHs、 IP67


3x3
. LED Power: 16W
. Operating Voltage: 10-30V DC
. Waterproof rate: IP 67
. 4pcs*4w high intensity CREE LED
. Color Temperature: 6000K
. Material: Diecast aluminum housing
. Lens material: PMMA
. Mounting Bracket: Stainless Steel
. Opitonal Beam: Spot beam 5 degree, Flood beam 90 degree
. 30000 hours above life time.
. Certificates:CE、 RoHs、 IP67

2x6
. LED Power: 18W
. Operating Voltage: 10-30V DC
. Waterproof rate: IP 67
. 6pcs*3w high intensity Epistar LED
. Color Temperature: 6000K
. Material: Diecast aluminum housing
. Lens material: PC
. Mounting Bracket: Stainless Steel
. Opitonal Beam: Spot beam 5 degree, Flood beam 90 degree
. 30000 hours above life time.

 

[gaterose]

Buyers

1/14
1. got556 - 21.5" BC Spot, 2x 3x3 flood
2. jbmccul - 31.5" BC
3. seevik - 21.5" BC x2
4. Djrashonal - 5x 3x3's flood, 1x 20" SR Combo, 1x 21.5" BC combo
5. t4rJohn - 2x 3x3 Spot, 2x 2x6 Spot, 1x 2x6 Flood, 2x 3x3 flood
6. Dusty Driftwood - 2x 7.5" BC flood
7. mx355 - 2x 3x3 spot
8. drifter33 - 13.5" BC
9. Ark_Swamp_Rider - 2x 2x6 flood, 1x 2x6 spot
10. cruisermansd - 6x 2x6 flood
11. LoudAl - 21.5" BC
12. Iroke17 - 2x 3x3 spot
13. riceman - 2x 2x6 flood
14. 00_4Runner - 13.5" BC
15. Joey91 - 41.5'' BC Series combo, x3x3 Flood, 2x 3x3 Spot[/COLOR]

1/27 Order
1 IRoke47 1 41.5 BC flood
2 SV dude 2 2x6 flood
3 justinh 2 3x3 flood
4 david z 1 7.5 BC combo
5 drifter33 2 2x6 flood
6 SCRunner12 2 3x3 flood
7 Jeremy556 1 21.5 BC spot
8 deedst4r 2 2x6 flood
9 rotozuk 2 2x6 spot 2 2x6 flood

 

[got556]

31.5" BC series for me.

W/ that said (as I said in the other thread) won't be able to pay til the end of the month. If that doesn't work, no biggie.

Thanks for doing this.

 

[jbmccul]

31" BC bar, ordering 1/15

 

[AleksV]

Is the measurement for end to end of the whole fog light, out just the leds measurement?

Count me in for two 21"combo BC series.

 

[gaterose]

That is just the bar with now mounts. I believe the 21.5" bar, for instance, has 20" of lights and .75" of housing on each side (including the dimple for the feet to mount to).

I believe with the feet mounted inward the 21.5" bar would be 22.5"; 24" with them mounted outward. The numbers would be the same for all other sizes just change 21.5" to 31.5".

The numbers are slightly larger for the BC series bars, and the single row bars are the actual size since the feet mount under those. I'll try to get some better numbers up for everyone tomorrow when I have time.

 

[Djrashonal]

EDIT: See new response on page 4
Thanks for doing this, Matt! Let us know when you need the $$$ :beer:

 

[daPitbull]

I'm in for a SR 39"

 

[Stockwell45]

When do you plan on ordering these? Don't have funds now, but if ordered at the end of the month I could probably make it work.

 

[mikey's2010SR5]

I'm in for a SR 39"

Let me know if you get it. Cheaper then Rigids and use a 5 watt vs rigid 3 watt LED. I would like to get a looksee

 

[NateMob]

I would like to see some photos and specs on the SR lights.

 

[t4rjohn]

Thanks for doing the group buy. I'll take

2@ 3x3 Spot
2@ 2x6 Spot
1@ 2x6 Flood

Thanks, and I presume that you'll post when we're to paypal you
T4RJohn

 

[SCRunner12]

Do you have any output shots of the 3x3's? Stupid question, but I'm assuming the 3x3's are 3" by 3". I need to make sure because the bumper I'm getting has holes cut for Rigid Dually's, but I can't come close to affording them, so this would be a nice cheap alternative. Also an ordering deadline would be helpful.

 

[gaterose]

When do you plan on ordering these? Don't have funds now, but if ordered at the end of the month I could probably make it work.

The plan right now is 1/31, but if enough people wanna move the order up we may be able to place an order in a couple of weeks then another for those who need to wait until the end of the month.

I would like to see some photos and specs on the SR lights.

There is a photo here - http://www.hanma-auto.com/components/com_virtuemart/shop_image/product/LED_Light_Bar_60_500635d1d0de7.jpg and the specs are listed at the bottom of the first post. Also, I've been told that it's easy to paint the silver black if for some reason the silver bothers you.

Do you have any output shots of the 3x3's? Stupid question, but I'm assuming the 3x3's are 3" by 3". I need to make sure because the bumper I'm getting has holes cut for Rigid Dually's, but I can't come close to affording them, so this would be a nice cheap alternative. Also an ordering deadline would be helpful.

No sorry no output shots of the 3x3. The lights are about 3" by 3", they're the same size as duallys. The deadline is set at 1/31 right now.

edit - there are some on shots in Zstampe's build thread but they don't show what the lights would look like at night

and [MENTION=88595]t4rjohn[/MENTION], yes I'll post (and probably send out PMs) when it's time to send money.

 

[gaterose]

One more thing - no one has ordered an SR in either of my orders, so the info I've posted here is pretty much all I have. The SR bars should be of equal quality, but everyone so far has ordered DRs because of the extra bang for the buck in terms of wattage, so I haven't seen one in person.

I added them here because a few people were asking about them.

 

[pelle047]

1 7.5" bc series combo
2 3x3 bc series flood

not sure how to go about payment...

 

[gaterose]

1 7.5" bc series combo
2 3x3 bc series flood

not sure how to go about payment...

Payment is easiest via paypal but if you don't want to use paypal you can PM me and we may be able to work something else out.

edit - I updated the first post to include the possibility of 2 orders. If you'd like to order 1/15 please put that in your post and if we can get enough people to make the shipping worth it then we'll place two orders.

 

[got556]

Okay I don't think a 31.5" BC will fit between the middle hoop of a DO bumper (which I plan to get with my tax return). Therefore maybe we should go with a 21.5" Spot BC and two 3X3 Flood BC's. So go ahead and revise me . And I should be able to pay by the 15th also. (Pending there are enough ppl to do it that early)

 

[gaterose]

Alright, I've changed my sheet and the second post to reflect everyone's new choices I believe. In the future please post again or PM me to change your order, I don't always see the edits.

We're pretty close to being able to place an order the 15th but we still need a few more to keep these prices (smaller order=more shipping per piece and that might affect the prices I listed if the order is too small). Still 10 days away though so there's time.

Feel free to share this with others or other forums if you think there might be interest.

 

[driffter33]

Put me down for 1 BC 13.5 combo on the 15th!