Hilux 167 Snorkel Install

[mtbtim]

Hey Dudes,

[MENTION=102606]infamousRNR[/MENTION] and I have another Sic Mod video for Y'all. If you're into wheeling and you're not scared of the water, this might be a mod you'll be interested in doing on your rig.

Here's the video and Enjoy the Show!

<iframe width="560" height="315" src="https://www.youtube.com/embed/UlSQI_Y8gk4" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

 

[3bears]

another nice video....gives me something to think about
but of course the ebay supplier you list does not ship to me...

 

[LittleCaesar]

I have to ask if you or Sean has performed the TB “O” gasket mod on any of your rigs?

 

[nissanh]

Tim.. great video! from where did you get the pre filter?

The stud that is not lined up with the fender can be installed from the wheel well. I had the same issue when I did the snorkel installation on my 2000 LC.

What did you do to get the front brake caliper at the front? Just curious.

Thanks!

 

[3bears]

I have to ask if you or Sean has performed the TB “O” gasket mod on any of your rigs?

I am not supercharged....that said...I did the "O" gasket mod and noticed no difference...maybe you need to be supercharged to notice the difference.
Unless your talking about some different mod...im talking where the gasket that mounts the throttle body to the plenum looks like a D and i replaced it with one that looked like an "O".

 

[mtbtim]

I have to ask if you or Sean has performed the TB “O” gasket mod on any of your rigs?

Yeah, we installed one on Sean's rig when we did his valve cover gaskets over 4 years ago. He knew he was going to add the supercharger and that's why we did it.

 

[mtbtim]

Tim.. great video! from where did you get the pre filter?

The stud that is not lined up with the fender can be installed from the wheel well. I had the same issue when I did the snorkel installation on my 2000 LC.

What did you do to get the front brake caliper at the front? Just curious.

Thanks!

Anwar got the pre-filter from a seller on Ebay. We provide a link in the video description.

That's good to know about the stud and it totally makes sense. Sometimes the obvious fixes aren't obvious. I'll share this with Anwar.

I guess you are asking about the Tundra Brake Upgrade? I did that a couple years ago. My buddy Mikey upgraded to some different brakes on his 3rd Gen and he gave me the calipers and rotors. Score!

A lot of the things I've done to this rig aren't advertised because I already shot the video on somebody else's rig. I do enough on the internet so a build thread documenting all the work I've done doesn't sound appealing to me.