How do you remove the wiper switch?

JPL

New member
Hi All,
My wiper switch needs to be changed in my '06, I have the new one and will attempt to change it tomorrow, any help would be great.
Thanks!
 
Register to hide this ad
I had to do this a few months ago, when I damaged my switch doing a new stereo install. It's really not difficult at all. First, you remove the plastic steering column shroud, which, if memory serves me, is 4 screws. Your wiper switch should now be exposed. Then, you remove the wiper switch wiring harness, followed by one screw near the top of the switch assembly. Hear is a graphic:

preacher35-albums-parts-picture19703-wiper-switch.jpg


Good luck!
 
I had to do this a few months ago, when I damaged my switch doing a new stereo install. It's really not difficult at all. First, you remove the plastic steering column shroud, which, if memory serves me, is 4 screws. Your wiper switch should now be exposed. Then, you remove the wiper switch wiring harness, followed by one screw near the top of the switch assembly. Hear is a graphic:

preacher35-albums-parts-picture19703-wiper-switch.jpg


Good luck!

Thanks for the help! It was actually 3 screws for the shroud and 2 on the switch, someone did mention to disconnect the neg from the battery, due to the air bag module in the column, anyway, I also found it easier to remove the harness after I removed the switch, not sure if that was correct, but it worked for me.
 
Would this be the Switch or the Motor? If it's the Switch, can I replace it with one with a Mist cycle? If so, does anyone have a P/N?

Thanks,
Jerry
 

Members online

No members online now.

Forum statistics

Threads
278,309
Messages
3,554,068
Members
248,016
Latest member
Advally Service

Trending content

Back
Top