How to Run 35's

[CallofBooty]

Was wondering what setup i would have to fit 35s

 

[ryankmasuda]

From what I recall a 3" lift and a 1" body lift and pound some pinch welds. But don't take my word for it. Maybe someone running 35's will let you know

 

[sn0wrunner]

It really depends how much trimming you want to do. Realistically you will need to trim no matter what set up you have. I would suggest a 3" kit, and a 2" body lift. Not saying it cant be done with less lift, just saying there will be more trimming to do.

 

[steezemcqueen]

Here is what i did. I basically just did what brian2sun did except I have a 2 inch body so i had to trim a little less.

I removed the coilover and jacked it up to full bump and trimmed and pounded until it was clear from lock to lock.

here are a few pictures of what i did

Before (only trimmed the fender liner so far)

trimmed and pounded.

Painted and finished

Thats all i needed to do for 35's with a 2 inch body lift and full bump.

 

[CallofBooty]

Thanks for all the feedback guys I already have a 3in susp. done I just recently bought a 2in body so im gonna see how this turns out. Thanks again and il post some pics up soon.

 

[CallofBooty]

Lift
- 3 ½ in Toytec front coil over kit
- ¾ top plate spacer kit
- LC Coils 8 wraps
- LC Shocks
- Toytec 2in body lift
- Panhard drop kit
- Front differential drop kit
Rims & Tires
- 315/75/R16 (Not sure what brand yet)
- 16X8 Procomp Rock Crawler rims
Other mods
- Power steering rack bushing kit
- Camburg upper control arms

 

[DirtDawg]

2 questions, 1. are your cv's steep. I would imagine. 2. didn't know toytec made a 2" body lift kit. More of a comment than a question.

 

[Clownmeat]

I have a 3" suspention lift and a 2" body lift also, my 33's still rub.

 

[CallofBooty]

Toytec makes a 2in Body Lift for 96-02 4-Runner - Toytec Lifts: Toyota Lift Kits: FJ Cruiser Lift Kits, Tacoma Lift Kits, Tundra Lift Kits, 4 Runner Lift Kits, Sequoia Lift Kits, Toyota Truck Lift Kits
and it depends how much u trim supposedly i have just my 3in on there so far with 305/70/r16 which ive had for a good 2 years but it depends how much u trim

 

[sn0wrunner]

Lift
- 3 ½ in Toytec front coil over kit
- ¾ top plate spacer kit
- LC Coils 8 wraps
- LC Shocks
- Toytec 2in body lift
- Panhard drop kit
- Front differential drop kit
Rims & Tires
- 315/75/R16 (Not sure what brand yet)
- 16X8 Procomp Rock Crawler rims
Other mods
- Power steering rack bushing kit
- Camburg upper control arms

Sounds like a nice setup!

Just curious, why are you running top plate spacers with your adjustable coil overs?

 

[CallofBooty]

Tryin to level out with 4in in the back

 

[CallofBooty]

so just tuned it to look level

 

[sn0wrunner]

gottcha.

Well post some pictures up once you get the 315's on there! :hungry:

 

[blcktpgsr]

Any update on the 35's?