Bilstien 4600s and stock springs. Had the lean and I've been chasing it. One spacer in the left rear and one on the left front non on the passenger side.
Prior to installing the front left 1 inch spacer I just had a 1/4 one, Can I double up on the 1/4 spacer?
Prior to adding the 1 inch spacer these were my measurements.
LF 35
LR 35 3/4
RR 36 1/2
35 3/4
When that was measured it was at a gas station so pretty flat. the 36 and 37 I'm getting now are on a not so flat surface but can defiantly see the difference of the front being higher.
