Interest in TEQ badges for the 5th Gen?

[bhicks22]

all the photos of the front badge are on a 2014+, would they also fit a 2010-2013?

I was told by a couple people that the factory badge is the same. I never actually had a 2010-2013 in front of me to verify so I had to take their word on it. I have already shipped over 30 of them so I'm assuming the info I was given is correct. I would LOVE to see pics of it installed on the earlier 5th gen for verification.
Edit: I should add that I DID verify with 100% certainty that the rear badge is the same on all 5th Gen 4runners. The problem with the front badge is that none of the parts catalogues show the emblems as a separate part. It shows the grill and emblem as one item with one item number for the styles of grilles. Even my local Toyota Dealer parts guys couldn't give me a clear answer. I had to just trust in the advice I was given. What would be more definitive is if I could just get someone to take the overall height and width of the 2010-2013 factory grill badge and post those measurements here. I had a guy on ebay do that for me, but sometimes folks suck at dimensions. Another set of dimensions would help verify their accuracy.

 

[nguyenn]

Received mine today. Absolutely beautiful.

 

[bhicks22]

Do we have anyone who has ordered the front badge for the 2010-2013 grill? willing to post pics of the front one installed? I was confident that it would be a perfect fit after being given that info by a few but now It's got me paranoid. I would really like to know with 100% certainty the front TEQ badge fits on the early 5th gen grill. If for some reason my info was bad, and a few of you ordered one for the early grill; I will definitely make it right. I will get the correct one made and in the mail asap.

 

[MESRunner]

Do we have anyone who has ordered the front badge for the 2010-2013 grill? willing to post pics of the front one installed? I was confident that it would be a perfect fit after being given that info by a few but now It's got me paranoid. I would really like to know with 100% certainty the front TEQ badge fits on the early 5th gen grill. If for some reason my info was bad, and a few of you ordered one for the early grill; I will definitely make it right. I will get the correct one made and in the mail asap.

I own a 2013 and just ordered one, once I get it installed I'll make sure to post some pics.

 

[bhicks22]

I own a 2013 and just ordered one, once I get it installed I'll make sure to post some pics.

Perfect. Thanks.

 

[nguyenn]

Heres how they look on my Rig. Thx Alot [MENTION=124475]bhicks22[/MENTION]

 

[eddie333]

I own a 2013 and just ordered one, once I get it installed I'll make sure to post some pics.

Perfect... I'm going to order as soon as I hear your update

 

[ic0517]

<----- Dumbass.


F----k me I didn't catch on you remove the existing badge. I thought you bolted it on like the other company or what Landcruiser had on his.

 

[SR5Bart]

I got my rear one the other day and put it on right away. Ive already had a couple people compliment them. Thanks again Brad

 

[bhicks22]

So still no takers on getting me the overall height and width dimensions from the factory grill emblem off of a 2010 - 2013?

 

[bhicks22]

I'm putting another request out for the dimensions of the factory grill badge from the 2010-2013 5th Gen. Just need to know the height and width. Also, my 2nd batch of grill badges is just about gone. I anticipate the last two selling today. My machinist is back from vacation today so batch #3 will get started very soon and I should be able to restock my website sometime around the end of next week. So be patient. The "sold out" message that will probably be up by this evening will be gone within a week.

 

[MESRunner]

Here's the badge on a 2013... Sorry it took so long to post it.

 

[bhicks22]

Here's the badge on a 2013... Sorry it took so long to post it.

Looks like a perfect fit. That definitely puts my mind at ease. I'm glad to visually see that the new grill badge does in fact fit on the 2010-2013 5th gen grill.

 

[MESRunner]

Looks like a perfect fit. That definitely puts my mind at ease. I'm glad to visually see that the new grill badge does in fact fit on the 2010-2013 5th gen grill.

It is a perfect fit, there's a slight gap all the way around which is similar to the factory badge. Sorry it took so long to post it we had some crappy weather earlier in the week. By the way, the craftsmanship on these is amazing!

 

[bhicks22]

Just a heads up. If anyone was planning on ordering a badge for Christmas. It must be ordered today if you want it by Christmas. After today, I can't guarantee a pre-Christmas delivery.

 

[bhicks]

It's been 11 years since I posted on this thread. Definitely dusting some cobwebs off this one. We have been selling the 5th Gen front and rear TEQ badges for quite a while and have had great success with that product line. Over the years we have had one consistent custom request that we have been happy do for customers which has been a blacked out TEQ badge instead of the black with brushed aluminum look. In the last couple years this request has gotten crazy popular so we finally decided to just make it an option on our of our seller platforms so folks don't have to reach out to us with the custom request but can order it directly from the part page. What we do is use a black satin finish for the entire piece. We then wet sand the raised/logo area giving the raised area a more matte finish with no sheen. This allows the logo to pop but still be subtle and all the same color black. It has been very popular with good feedback. Here's some pics of the new look and a couple links at where you can buy them.

5th Gen 4Runner TEQ Badges – BH3D Printing

etsy.com

 

[bhicks]

Thanks for the orders for the blacked out version over the last few days. We did run out of stock but got another batch made and will be ready to ship out tomorrow.