keyless entry beep volume

[jamr1]

My owners manual says the dealership can change the volume of the beep on my 4runner. You guys know ways around everything else on these things, Is there a shortcut to do this yourself. My the way, loving my 4runner. Also I had a thread a few months back talking about painting my brushguard. I used epoxy spray paint from Ace and it is still holding up to road gravel.

 

[techno]

With the key out of the ignition and any door open, press and hold the UNLOCK switch on the remote for more than 5 seconds. The buzzer will sound 2 times.

For volume up, press the LOCK switch while pressing the UNLOCK switch.

For volume down, press the BACK WINDOW OPEN switch while pressing the UNLOCK switch.

To cancel, press the UNLOCK switch, and the buzzer will sound 2 times.

There are 5 volume levels, the initial level is set to intermediate.

 

[LINY4Runner]

anyone know where the hell this beep comes from?

i wanna find the speaker and put it in my other car, i like the beep over the chirp of a normal alarm, it sounds more elegant

 

[KellyJ]

anyone know where the hell this beep comes from?

i wanna find the speaker and put it in my other car, i like the beep over the chirp of a normal alarm, it sounds more elegant

If you open your hood and look in the far back left of the engine bay, you'll see a little black Denso module with a plug going into it. That's the "speaker" for the alarm beep. I unplugged mine because I don't need everyone knowing my car is being locked or unlocked. The lights flashing is enough for me

 

[Rock Slide]

Here's a link on how to disable the keyless entry chirp:

http://www.yotatech.com/f127/disable-keyless-entry-chirp-2001-2002-4runners-103812/

 

[Rock Slide]

And like stated above, here's a guide on how to adjust the volume of the chirp. Personally, I just disabled mine completely from chirping.

 

[Clemsonfan15]

How do you do this for '96-'98 who don't have the rear window down button?

 

[Ron Helmuth]

bump-could this become a sticky please?

Found link via Yota Tech question by JWaldz

3rd Gen 4Runner Lock/Unlock Alarm Beep... How to change? - YotaTech Forums

bump to the top

Moderators could this become a sticky perhaps in Accessories or Pimp Zone or even right here in 3rd gens?

thanks again RockSlide. Great info from you like always.

As JWaldz noted he can not always hear the beep beep and as I am aging I notice same thing as well. Not really in favor of the horn honk to acknowledge the locking function.

I can always press the distress red button on back of the key fob if I need to locate the vehicle in a crowded parking lot for example.

 

[CO_FlyFisher]

My "buzzer" died earlier this year. At max volume, it can just barely be heard, and you really have to listen for it. It drives my wife nuts not being able to hear it.

Anyone have a "buzzer" they would like to sell for a nominal fee?

 

[Maritimer]

I set my beeper chirp to high this morning, thanks to this thread in a Google search, after just last night reading the part about contacting the dealer in my manual. The hell I needed a dealer to do that. I like to know they are locked. Apparently it won't chirp if a door is ajar.

 

[MrBobDobalina]

Love this site!

 

[foyaboya]

I lost count of how many times I've read a post or thread and was like...:wow: "No Freaking way it's that easy..." or "dang, what else do I not know about my 4Runner!" Love this site and group of 4Runner owners!
:thanks:

 

[4yogger]

Thread revival: despite turning the volume all the way up the buzzer is just barely audible with my head next to it. I went to eBay and got a replacement thinking the buzzer was shot. New one arrived, plugged it in, same scenario. Anyone have any ideas?

 

[Ron Helmuth]

my guess

4yogger my guess would be corrosion at the beeper location underhood.

 

[4yogger]

4yogger my guess would be corrosion at the beeper location underhood.

I haven't tried to clean it only because it looks like it's in great condition, but I think I'll try that. Simple enough to spray some cleaner to the contacts in the plug.. I'll check it with a multimeter and see if I'm getting 12v too. Thanks for your suggestion!

 

[ivopivo]

Can this be done on a 97 4Runner with the old remote that has only top button for lock and unlock? If not I'll probably be wiring a different/quieter speaker or removing it completely as it's too loud for my liking.

 

[Ehahn84]

My beeper was dead so I tore it out and found they have a direct replacement available on Amazon. Loud as hell and super easy to swap in.

Floyd Bell Inc. M-80W , Alarm, Piezoelectric, 92 dBA to 103 dBA@ 2 Ft., Extra Loud Continuous, 5-15VDC https://www.amazon.com/dp/B00DDF113O/ref=cm_sw_r_cp_api_Y6WVzbP3KR4KZ

 

[Pedrojr80]

I haven't tried to clean it only because it looks like it's in great condition, but I think I'll try that. Simple enough to spray some cleaner to the contacts in the plug.. I'll check it with a multimeter and see if I'm getting 12v too. Thanks for your suggestion!

Did you notice any improvement after cleaning the plug? Im in the same boat bough me one from ebay and still sounds like the old one. Please update us! Thanks


Sent from my iPad using Tapatalk

 

[Kokoman78]

My key fob doesn't have a back window switch

 

[martinbril]

Any idea how to get the turn signals to flash when locking the doors on a 2005?
I bought mine used without any flashing or honking so I got to stand pretty close to hear the doors lock, which can be very frustrating..