Kromealt's offroad Limited build

[kromealt]

More bank account drainage - insane money pit. Ordered:

Dirt King Heimed UCA - return my TC bushing UCA which I feel are junk
Warn M8000-S Winch
Factor55 1.5 Fairlead, Ultrahook & Rear hitchhook (green!)
Baja Designs 30" Light bar
CVT Mt Shasta Summit Extended w/annex - Bright Green
Eezi-Awn Swift Awning

CBI needs to hurry up with my Prinsu

 

[kromealt]

Swapped out TC UCA for Dirt King Heimed UCA - very impressed with this UCA so far, silent as a ghost and the fit/finish is superb. Can get better pics if anyone is interested. Also installed Baja 30" lightbar and wired up the baja fogs. Awning and hitch stuff arrived today, winch tomorrow.

 

[kromealt]

Installed winch and other minor goods, sent back lightbar for replacement after noticing it was used. Ordered more stuff today - I still want a drawer system but big spending needs to stop now besides minor options like diff breathers:

Dometic 50Q Fridge & Fridge slide (Better than ARB IMO)
ARB Twin Air Compressor & Slee Engine bay mount
Hi-Lift xtreme jack - been wanting to replace my ancient rusted out one for years...good excuse

Getting extremely impatient for Prinsu rack to ship.

 

[kromealt]

CVT RTT arrived today but had to refuse delivery due to shipping damage, then someone at CVT gave me the cold shoulder about it - pretty frustrated, hoping the issue gets remedied.

They have a good reputation so I'm sure it's fine - after searching, shipping damage seems pretty common for CVT so I don't understand why they don't strap to an oversized pallet.

 

[kromealt]

ARB Compressor, slee mount and replacement BD Light bar arrived today, Fridge arrives Monday and replacement CVT Tent scheduled for Tuesday. I'll mount compressor and wire light bar tomorrow with a new pic.

 

[kromealt]

Was a pita to install (mostly my own idiocy) but this compressor is quickly turning into my favorite mod. Was so awesome airing down to 20psi for trailing and afterwards back up in 4 minutes.

 

[kromealt]

Trail day

 

[borfoo3]

Awesome build there!!

Looking forward to hearing more on that KING setup.. Will be my next step up from the 6112/5160 combo.

A video in action wouldn't hurt either

 

[kromealt]

Installed a 3/4 Plywood platform, riveted into floor with Dometic 50Q Fridge and slider. Did a half ass job on the carpet but otherwise it turned out alright, will revisit when I decide to do drawers.

 

[ConnMan66]

Installed a 3/4 Plywood platform, riveted into floor with Dometic 50Q Fridge and slider. Did a half ass job on the carpet but otherwise it turned out alright, will revisit when I decide to do drawers.

Very nice! :trophy:

 

[kromealt]

Wired up switchable constant power to fridge today. Mini fuse tap to my growing cluster of switches with a run to cargo and spliced into the 12v dc outlet. Constant power to fridge when I want it, off when I don't - perfect.

Dual battery and one of those fancy switch cluster panels is in my future no doubt.

Oh and Prinsu rack delivery coming Tuesday so finally get to wrap this up with awning and RTT....pumped!

 

[LJ75 Driver]

Just a quick question... on your SCS wheels, are you still running spacers behind them or did I get crossed up somewhere? I'm watching every day for the Ray10's, my wife has her heart set on them.

 

[kromealt]

Just a quick question... on your SCS wheels, are you still running spacers behind them or did I get crossed up somewhere? I'm watching every day for the Ray10's, my wife has her heart set on them.

Yes still running spacers. Set up apple pay or paypal 1click thing to buy SCS or others will beat you to the purchase - and watch their instagram for stock.

 

[kromealt]

Ordered 650lb springs from Filthy to replace my 600lb on Kings. After all the additional weight I've been adding and the preload trying to maintain 3" of front lift 600lb is struggling. Once they settled I gained quite a bit of the 4runner lean too.

Really wish 600lb was enough as I'm tired of d!cking with it.

 

[kromealt]

Installed Prinsu rack, CVT RTT, EeziAwn Swift and Pelican

Prinsu rack was a nightmare - they sent me wrong color crossbars and it was missing hardware which I didn't find until after holes were drilled. CBI Customer service is pretty good though.

Also, holy crap what a pain in the a$$ it is to mount RTT to Prinsu - so little room even with my girly hands.

 

[kromealt]

Installed Rotopax 2 gallon water to my Gobi ladder and mounted Hi Lift jack to Prinsu rack - I now have no room left on rack except left side. On a side note, I'm definitely sagging in the rear with a full loadout so heavier rear springs might be needed in the near future.

 

[kromealt]

Also 1st functional test of CVT tent on roof and had to throw in my bag/blankets. Pretty quality tent, finally putting her to use this weekend!

 

[ConnMan66]

Also 1st functional test of CVT tent on roof and had to throw in my bag/blankets. Pretty quality tent, finally putting her to use this weekend!

Very Nice! :thumb3:

 

[4rNoob]

why do they say you can't go off road with a limited? Maybe less capable than a trail...

 

[Plumonium]

How much all this cost??