LED lighting

[Clemsonfan15]

I auctually used v-leds for my gauge cluster. I used these and they seem to spread out the light just fine: http://www.v-leds.com/Shop/Control/Product/fp/vpid/4481133/vpcsid/0/SFV/32481

For the glove box and behind the AC controls I used tri LEDs. I just used super bright LEDs for the shifter, key ring, and ash tray.

 

[Charlee78]

Hey guys!! Just found the makers of the clocks for our trucks!! I sent them an email asking if it is possible to change the color of the clock. Hopefully, they will take the time to answer...

 

[Clemsonfan15]

Hey guys!! Just found the makers of the clocks for our trucks!! I sent them an email asking if it is possible to change the color of the clock. Hopefully, they will take the time to answer...

Nice work man. That would be cool if they could make different colors.

 

[sn0wrunner]

Awesome! Its the only stock green left!

 

[findlayjeff]

how did you guys change out the light under the rpm gauge that tells you what gear your in....and the ac light that bulb is so small i have never seen one like it

 

[Clemsonfan15]

The AC light is a neo. I ordered an A I think, or what ever the smallest one is. It didn't work though, so I just put the stock bulb back in.

 

[findlayjeff]

so its still green what did you do with the gear selector light by the rpm gauge

 

[Clemsonfan15]

Yeah it's still green. I could have just taken the bulb out, but I wanted to be able to see it at night. It doesn't look terrible.

I didn't change the gear selector lights. I didn't feel as if it was worth it to spend the money and I didn't know how to do it. I don't think I have heard of anybody changing those.

 

[findlayjeff]

thats the only one i did not do to. i could not see how you would

 

[ambush]

2000 4runner LED lightd

Ok..
this has been asked and have not been answered correctly.

I have a 2000 Limited and I ordered some bulbs for my DOME which were wrong and the dash that were correct.

Let me break it down:

Dash (SPEEDO)
3 - #24s (THEY ARE 24s because all you do is remove the GREEN bulbs. Take the bulbs out of its socket and replace them with #24s! EZ!!!)

Dome Light
1 - 3175 (31 mm!!) I ordered standard 3175 but it came as a 36 mm. WAYYYY TOO LONG!! I was so pissed!!

MAP LIGHTS
2 - BA9s (just twist them in! and boom!) The led wedge is nice but for ease just put a BRIGHT bulb in there

License plate lights (the LEXUS LOOK)
2 - 194 (t10) I thought they were 3175!!
SO MAD!!

Key RING
1 - #74

Other than that. It is EZ. Take your time.

Im ordering from ledlight.com

Let me know what questions you have.

Thanks

-Ambush

 

[move120]

i bit the bullet.

now its just a matter of waiting for the mail

 

[Clemsonfan15]

i bit the bullet.

now its just a matter of waiting for the mail

About time.

Which company and color did you go with?

 

[move120]

autoillumination

i got all super white, a variety of bulbs..

3 of these 24's for the gauges:

2 of these 74's for my cig lighter ring, and key ring:

3 type A neo wedges and 2 type B for the digital ac/heat and rear window:

1 of these 74's for the shifter:

2 of these for the cup holder mod:

i already swapped all my dome lights ash tray, and glove box with super whites from vleds so the reset of these should be a nice complement to those and my footwell lights

 

[move120]

edit:

i don't know why the pictures look different, but they are all labeled under the same color, hope there isn't too much of a discrepancy

 

[move120]

I HAVE PICS!!!! uploading them just wanted to catch a few of you to showww you all the goods! give me a couple mins

 

[move120]

BEFORE:

AFTER:

 

[move120]

and i added a trd sticker while the dash was apart:

 

[DavidAlexander]

Nice job move, I guess its about time to do mine too.

 

[Rich]

ash tray light

Can someone tell me how to access the bulb for tha ash tray

 

[KellyJ]

Dude, I am so replacing the LED's behind my gauges now. That white light looks straight baller status haha. And those cupholders are dopeeee.